Advertisement

Quick Links

EYEZONE P102-8
User Manual
Oct 26, 07
3 4 4 1 2 F 1 3
FCC Notices
It's herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is subject
to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a residential installation.
This equipment generated uses and can radiate radio frequency energy and if not installed and used
in accordance with the instruction manual may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio of television reception, which can be determined
by turning the equipment off or on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio TV technician for help.
CE Declaration
This device complies with CE class B.
*EN55013
EN61000-3-2
EN61000-3-3
EN55020
Printed in Taiwan R.O.C.
All contents are subject to change without notice.
All trademarks are the property of their respective owner.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P102-8 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EYEZONE P102-8

  • Page 1 FCC Notices EYEZONE P102-8 It’s herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. User Manual This device must accept any interference received, including interference that may cause undesired operation.
  • Page 2: Table Of Contents

    2. INTRODUCTION 6.1 SLIDE SETUP……………………………………..…. 6.2 MUSIC SETUP…………….………………………… The Eyezone P102-8 is a digital signage that works with laser scanner. It can play the corresponding file automatically when the laser scanner scans the bar-code. It uses media files 6.3 MOVIE SETUP…………….…………………………...
  • Page 3: Features

    3. FEATURES (continued) 5. REMOTE CONTROL Multi-Language OSD:English, French, German, Italian, Portuguese, Spanish, Netherlands, Japanese and Chinese. Supports SLIDE SHOW Function: With 14 kinds of transition effects. Power on/ off Supports SLIDE TIME (INTERVAL) Mode:Interval time with 1, 3, 5, 10, 30, 60 seconds. Mute sound Supports MUSIC SLIDE Show:Music and pictures play at the same time.
  • Page 4: Setting Up

    6.4 SLIDESHOW SETUP 6. SETTING UP SLIDESHOW MODE:Set the slideshow to start automatically. FOLDER REPEAT:Set all files (picture, music or movie) Press the “SETUP” button on the remote control to open the in the folder to show only once or continuously (loop). “SETUP MENU –...
  • Page 5: Using The P102-8

    7.2 PLAY MUSIC FILE 7. USING THE P102-8 Step 1: Press the “MUSIC” button on the remote control from any menu. Copy files (music, picture and movie) to the memory card first. 7.1 PLAY PICTURE FILE Step 1: Press the “SLIDE” button on the remote control from any menu.
  • Page 6: Play Movie File

    7.3 PLAY MOVIE FILE 7.4 FILE LIBRARY Step 1: Press the “MOVIE” button on the remote control from any menu. Step 1:Press the “FILE” button on the remote control from any menu. Step 2: The preview mode will show all the video files on the memory card. Step 2:You can see all the files (including picture, music and movie) on the left panel of the “FILE LIBRARY”.
  • Page 7: Using The Laser Scanner

    All framed barcode names represent as default settings. Use the laser scanner to scan the bar-code, and the P102-8 will find out and play the corresponding file in the memory card automatically on the screen. NOTE:Keep 5 to 10 centimeters of distances between scanner and bar-code.
  • Page 8 Codabar Enable Code 39 Enable Code 39 Disable Codabar Disable...
  • Page 9 ITF 2 of 5 Enable UPC/EAN/JAN Enable UPC/EAN/JAN Disable ITF 2 OF 5 Disable...
  • Page 10 Chinese Post Code Enable Code 128 Disable Chinese Post Code Disable...
  • Page 11 Code 93 Enable EAN-128 Enable Code 93 Disable EAN-128 Disable...
  • Page 12 Code 32 Enable MSI enable (Italian Pharmacy Code) Code 32 Disable (Italian Pharmacy Code) MSI Disable...
  • Page 13 EAN-13 Convert to ISBN/ISSN Enable UPC/EAN ADD ON OFF EAN-13 Convert to ISBN/ISSN Disable ADD ON 5 only...
  • Page 14 ADD ON 2 only EAN/UPC +Add on (none mandatory) ADD ON 2 or 5 EAN/UPC + Add on ( mandatory)
  • Page 15: Troubleshooting

    Push cards gently and securely. If the card does not insert easily, check the direction. Memory card Confirm format of the card. The P102-8 supports CF, SD, MMC and MS (Pro) memory card. Force UPC-A to EAN-13 format disable 1. Check if the mute function is on.

Table of Contents