Scooter Operations
Scooter Operations
•
If the vehicle is supplied with a sealed battery, there is no
need to check the electrolyte.
•
If using a non-sealed battery, check the electrolyte fluid level
and refill with distilled water as necessary.
•
If not using the vehicle for a long period, remove the battery
and store in a cool, well ventilated area to prevent discharge.
1. Remove the 3 screws in the battery cover.
2. Disconnect and remove the battery.
3. Clean with a brush. Wipe Vaseline on posts.
4. Replace and reconnect the battery.
5. Replace the battery cover and 3 screws.
NOTE: When removing the battery, disconnect the positive post first.
When reinstalling, connect the positive post first.
Inspect and tighten the post screws as necessary.
Servicing
Battery
Battery Cleaning
29.