JVC KD-ADV6580 Instructions Manual page 46
Jvc dvd/cd receiver instructions
Hide thumbs
Also See for KD-ADV6580:
- Installation & connection manual (6 pages) ,
- Installation & connection manual (6 pages)
Table of Contents
Advertisement
Available languages
Available languages
Menu
Item
OSD POSITION
iPod ARTWORK
DIGITAL AUDIO
OUTPUT
DOWN MIX
D. RANGE
COMPRESSION
DivX
REGISTRATION
FILE TYPE (DISC) Select playback file type when a disc contains different types of files.
FILE TYPE (USB) Select playback file type when a disc contains different types of files.
46
Select the on-screen bar position on the monitor.
• 1
: Higher position
• 2
: Lower position (Guidance below the disc setup menu will
disappear.)
While playing back a track (in <HEAD MODE>), Artwork recorded for the track is
displayed on the monitor.
• OFF
: Cancels.
• ON
: Activates Artwork display.
• It takes 5 seconds or more to display an Artwork and no
operations are available while loading it.
Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal.
• OFF
• PCM ONLY
• DOLBY DIGITAL/PCM
• STREAM/PCM
When playing back a multi-channel disc, this setting affects the signals reproduced
through the LINE OUT jacks (and through the DIGITAL OUT terminal when "PCM
ONLY" is selected for "DIGITAL AUDIO OUTPUT").
• SURROUND COMPATIBLE : Select to enjoy multi-channel surround audio by
• STEREO
You can enjoy a powerful sound at low or middle volume levels while playing a
Dolby Digital software.
• AUTO
: Select to apply the effect to multi-channel encoded
software (excluding 1-channel and 2-channel software).
• ON
: Select to always use this function.
This unit has its own Registration Code. Once you have played back a disc in which
the Registration Code recorded, this unit's Registration Code is overwritten for
copyright protection.
• AUDIO
: Play MP3/WMA/WAV files.
• VIDEO
: Play MPEG Video files.
• AUDIO + VIDEO : Play MPEG Video/MP3/WMA/WAV files.
• AUDIO
: Play MP3/WMA/WAV files.
• VIDEO
: Play MPEG Video files.
• AUDIO + VIDEO : Play MPEG Video/MP3/WMA/WAV files.
Setting
: Cancels.
: Select for an amplifier or a decoder incompatible
with Dolby Digital, MPEG Audio, or when
connecting to a recording device.
: Select for an amplifier or a decoder compatible
with Dolby Digital.
: Select for an amplifier or a decoder compatible
with Dolby Digital, and MPEG Audio.
connecting an amplifier compatible with Dolby
Surround.
: Normally select this.
Hide quick links:
Advertisement
Chapters
Table of Contents
