Outdoors RV 2015 Owner's Manual
  1. Manuals
  2. Brands
  3. Outdoors RV Manuals
  4. Motorhomes
  5. 2015
  6. Owner's manual

Outdoors RV 2015 Owner's Manual

Outdoors rv travel trailer 2015 owner's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Outdoors RV 2015

Summary of Contents for Outdoors RV 2015

  • Page 2: Table Of Contents

    12 - Volt DC System Exterior Owner's Responsibility 12 - Volt DC System Interior Dealer's Responsibility Battery Disconnect Switch Outdoors RV 1-2-3 Warranty Solar Panel Details About One Year Warranty Propane System ----------- 59- 66 Warranty Exclusions Outdoors RV Responsibility...

  • Page 3: Introduction

    INTRODUCTION Outdoors RV Manufacturing appreciates and welcomes you as a customer. Your decision to own a travel trailer produced by Outdoors RV is a major purchase and we want your experience to be enjoyable. To help get you started, please take a few minutes and review the Owner's Manual. The information provided is pretty straight forward and will help provide you with many of the functions and required maintenance procedures necessary on your RV.
  • Page 4 The owner is responsible to return the trailer to an authorized dealer for any repairs and service that may be required. Your Outdoors RV dealer is responsible for proper service before delivery and will have a continued interest in your satisfaction. We recommend that warranty and maintenance services be performed by your Outdoors RV Dealer.
  • Page 5 LIMITED ONE YEAR WARRANTY Outdoors RV manufacturing Warrants for a period on one (1) year from the date of purchase that the trailer manufactured and assembled by Outdoors RV Manufacturing shall be free from defects in materials and workmanship supplied and attributable to Outdoors RV.
  • Page 6 Maintenance services are also excluded from the warranty, as it is the retail owner's responsibility to maintain the recreational vehicle. Outdoors RV does not take any responsibility, to any owner, beyond the original cost of the recreational vehicle to Outdoors RV or for any undertaking, representation, or warranty made by...

  • Page 7: Warranty

    How to Obtain Warranty Service The retail owner must deliver the recreational vehicle to an authorized Outdoors RV dealer to obtain service. with proof of purchase and freight prepaid within a reasonable time after discovery of the defect within the warranty period.
  • Page 8 No Person has the authority to enlarge, amend, or modify this Limited Warranty. Outdoors RV will not be responsible or liable for loss of use of the recreational vehicle, on site service. Calls or service charges, loss of time, inconvenience, expenses for gasoline, towing...
  • Page 9 Warranty Inspection Each Outdoors RV dealer is required to review the limited warranty and inspect the unit along with you. The dealer has been provided with a pre-delivery checklist. Review this checklist with the dealer. You should not sign the checklist until this review is complete and any questions about anything you do not understand have been answered.
  • Page 10 Inspecting Repairs Outdoors RV and your dealer want you to be satisfied with any repair. When the repair has been completed, inspect thoroughly. Have the dealer service personnel review the repair or repairs performed. Once satisfied, sign the Outdoors RV Warranty Repair Order. Your dealer should provide you with a copy of the Outdoors RV Warranty Repair Order.

  • Page 11: Effects Of Prolonged Occupancy

    Warranty Effects of Prolonged Occupancy Outdoors RV Manufacturing has designed your travel trailer for recreational use and short-term occupancy. If you occupy your trailer for extended periods of time, be prepared to deal with condensation and humid conditions that may be encountered. The relatively small...
  • Page 12 Oregon and if the proper maintenance was preformed and documented properly and the defect is valid Outdoors RV will authorize for the repair here at the factory in Oregon at no expense to the customer...

  • Page 13: On The Road

    ON THE ROAD State Laws in the United States and Provincial laws in Canada vary concerning operator licensing requirements and vehicle dimensional restrictions. Check the laws in the area where you anticipate traveling. GUIDELINES FOR EQUIPMENT SELECTION AND PREPARATION Your towing equipment, its adjustments and how you load the trailer will have a great effect on trailer towing stability and handling.

  • Page 14: State, Canadian Provincial And Local Requirements For Towing

    On the Road - continued - Conventional trailers: Use a weight distribution hitch rated to pull not less than the trailer Gross Vehicle Weight Rating (GVWR) and with spring bars rated not more than the ratings shown under Trailer Loading in this chapter.

  • Page 15: Hitching Procedures / Conventional Trailers

    On the Road - continued protect your investment as well as other peoples lives and property. As a trailer owner, it is your responsibility to be familiar with these devices and their proper use. Make sure you read and understand the instructions furnished by the manufacturers of each of these devices.

  • Page 16: Adjustable Height Coupler

    On the Road - continued 9) Connect the breakaway switch lanyard to an attachment eye on the tow vehicle. Be sure that the switch lanyard is adjusted so the switch is not activated during a full "jackknife" turn. WARNING - Do not connect the breakaway switch lanyard to the hitch ball or to any removable part of the hitch.

  • Page 17: Braking System

    On the Road - continued BRAKING SYSTEM The electric brakes on your trailer are similar to the drum brakes on many cars and trucks. The basic difference between them is that your trailer brakes are operated by 12-volt DC power from the tow vehicle, rather than by hydraulic action.
  • Page 18 On the Road - continued 7-CIRCUIT RECEPTACLE Clearance & tail lights Battery Charge Stop & LH turn Stop & RH turn Brakes Ground Yellow / Backup (Reverse) lights - (If equipped) Brake System Connector Plug Certain models may be equipped with backup (reverse) lights which will be connected to the Auxiliary (Yellow - 7) position of the Brake System Connector Plug.

  • Page 19: Trailer Loading

    On the Road - continued the braking effort from the brake controller, the greater the breaking force applied to the trailer brakes. The trailer brakes are also actuated by the breakaway switch in case the tow vehicle and trailer become uncoupled. To insure brakes are in good working order, brake shoes and drums should annually be checked for wear.
  • Page 20 On the Road - continued WARNING Do not exceed the specified tongue weight or spring bar rating. Damage to the trailer frame and poor handling and braking may result. WARNING Before towing this trailer consult the Owner's Manual for proper conventional loading, weighing procedures and definitions.
  • Page 21 On the Road -continued 1) To Obtain Individual Axle Weights, Gross Weights (Tow Vehicle) and Gross Combined Weight (Travel Trailer Plus Tow Vehicle): a) Drive onto the scale loaded with all supplies, passengers, and equipment,. Take a weight reading as the trailer comes onto the scale.
  • Page 22 On the Road - continued √ NOTE If other equipment or options such as leveling jacks, awnings, roof storage pods, etc., are installed after the trailer leaves the factory, the weight of these items must be subtracted from the load and cargo carrying capacity.

  • Page 23: Cargo Carrying Capacity

    - Better tow vehicle fuel mileage and reduced tire wear. Safe Driving Guidelines Outdoors RV does not recommend transporting passengers in your trailer while traveling. Your tow vehicle will have very different handling and stopping characteristics when it is towing a trailer. The...
  • Page 24 On the Road - continued - Plan your trip and map out the roads you plan to use. Find out the grade of the area you will be traveling in. Some mountain passes have extreme conditions in elevation grade and curves you may prefer to avoid.

  • Page 25: Tires

    On the Road - continued WARNING Ensure that small children are not present anywhere near your trailer when backing up. PARKING When parking parallel to a curb, be sure to allow for poles or other obstructions beyond the curb as the front and rear portions of the trailer swing wider than the tow vehicle's body.

  • Page 26: Wheel Lug Nut Torque

    On the Road - continued - Hold the steering wheel firmly and move slowly to a safe place off the road - Park on a firm, level spot - Turn off the ignition - Turn on the hazard warning flasher system WARNING Check tire pressures before traveling.
  • Page 27 On the Road - continued from a wheel, especially at low speeds, a wheel lug nut may have come loose. This problem is usually caused by improper tightening or by faulty or damaged lug stud threads. If you have reason to believe a lug nut has come loose, safely stop the vehicle at the side of the road as soon as possible.
  • Page 28 All other loose items added by the consumer, as well as fresh water, are considered to be cargo. It should be noted that any other add-on items not supplied by Outdoors RV nor installed by Outdoors RV will reduce the amount of cargo which can be carried.
  • Page 29 On the Road - continued It is the ultimate responsibility of the user to correctly load the trailer, distribute the weight appropriately and not exceed the placard cargo rating disclosed. Instructions on how to properly accomplish this are disclosed in the "on the road" section of the owner's manual. This portion of the Owner's Manual contains tire safety information as required by 49 CFR 575.6 Section 1, based in part on the National Highway Traffic Safety Administration's Brochure entitled "Tire Safety- Everything Rides on It, contains the following items:...
  • Page 30 On the Road - continued Safety First-Basic Tire Maintenance Properly maintained tires improve the steering, stopping, traction, and load-carrying capability of your trailer. Under inflated tires and overloaded trailers are a major cause of tire failure. Therefore, as mentioned above, to avoid flat tires and other types of tire failure, you should maintain proper tire pressure, observe tire and trailer load limits, avoid road hazards, and regularly inspect your tires.
  • Page 31 On the Road - continued Steps for Maintaining Proper Tire Pressure - Step 1: Locate the recommended tire pressure on the trailer's tire information placard, certification label. - Step 2: Record the tire pressure of all tires - Step 3: If the tire pressure is too high in any of the tires, slowly release air by gently pressing on the tire valve stem with the edge of your tire gauge until you get to the correct pressure.
  • Page 32 On the Road - continued Information on Passenger Vehicle Tires P - The "P" indicates the tire is for passenger vehicles. NOTE: Passenger car tires are not recommended for use on trailers, because the capacity ratings are not marked on the side walls of these tires. In the event a passenger car tire is used, the capacity must be derated by 10%.

  • Page 33: Trailer Load Limits

    On the Road - continued Additional Information on Light Truck Tires - Tires for light trucks have other markings besides those found on the sidewalls of passenger tires. LT - The "LT" indicates the tire is for light trucks or trailers. ST - An "ST"...

  • Page 34: Tire Safety Tips

    On the Road - continued It is the air pressure that enables a tire to support the load, so proper inflation is critical. Since RV's can be configured and loaded in many ways, air pressures must be determined from actual loads (determined by weighing) and take from the load and inflation tables provided by the tire manufacturer.

  • Page 35: Living With Your Trailer

    The Lippert Electric stabilizer jack is intended for the purpose of Stabilizing the rear and front end of the trailer. The use of this system for any other reason other than which it is intended is prohibited by Outdoors RV and Lippert's Limited Warranty and may result in serious personal injury or death.
  • Page 36 Living with your Trailer - continued Stabilizing Procedures for a Conventional Trailer 1. If the site is not an asphalt pad, concrete slab or other prepared surface, be sure it is as level as possible. Be sure the ground surface is not soft and will support the weight of the trailer on the stabilizing jacks or other support devices.
  • Page 37 Living with your Trailer - continued Slide out Override Manual Operation of the Slide out Mechanism 1. It is necessary to disconnect 12 volt power from the slide out motor. The 12 volt power can be disconnect by turning the disconnect switch to the off position or by disconnecting the battery cables from the batteries 2.
  • Page 38 Living with your Trailer - continued Basic Troubleshooting Do not move the RV with the room extended. This can be unsafe and will damage the slide out mechanism. Symptoms: "The Room Won't move or moves Slowly" 1. Are there any obstructions in the path of the room? 2.
  • Page 39 Living with your Trailer - continued Q. - In cold weather, my windows and walls look like they're sweating. Is that con- densation? A. - Yes. Your windows are a good way to know if the humidity in your RV is too high. All air contains water vapor.
  • Page 40 Living with your Trailer - continued Q. - What can I do to reduce or eliminate condensation problems in my RV? A. - The two most important things are: Reduce moisture released into the air and increase ventilation To reduce moisture released inside the RV: 1.
  • Page 41 Living with your Trailer -continued WARNING ▲ Do not cover emergency exit window(s). This window must be left accessible at all times for emergency exit. Dripping Ceiling Vents During cold weather, condensation frequently forms on ceiling vents and may even accum- ulate to the point of dripping onto the surfaces below.
  • Page 42 Living with your Trailer - continued * Promptly clean up spills, condensation, and other sources of moisture. Thoroughly dry any wet surfaces or material. Do not let water pool or stand in or under your RV. * Inspect for leaks on a regular basis. Look for discolorations or wet spots. Repair any leaks promptly.

  • Page 43: Fire Safety

    Living with your Trailer - continued ▲ WARNING Irritant: This product contains a urea-formaldehyde resin and may release formaldehyde vapors in low concentrations. Formaldehyde can be irritating to the eyes and upper respiratory system of especially susceptible persons such as those with allergies or respiratory ailments.
  • Page 44 Living with your Trailer -continued Once ignited, urethane foams will burn rapidly, releasing great heat and consuming oxy- gem very quickly. In an enclosed space the resulting deficiency of oxygen will present a danger of suffoca- tion to the occupants. Hazardous gases released by the burning foam can be incapci- tating or fatal to human beings if inhaled in sufficient quantities.

  • Page 45: Storage

    Living with your Trailer -continued MINI-BLINDS (If Equipped) To Lower mini-blinds: Pull straight down on the cord slightly, and move it about 45 degrees to either the left or right and lower the blind. Stop the blind in mid-travel by moving it back to the straight down position.
  • Page 46 Living with your Trailer -continued INTERIOR STORAGE The closets and cabinets have catches along one edge of the door. Pull on the cabinet door handle to open. Overhead doors have supports to hold them open. The drawers have a catch along the edge of the drawer. Pull the drawer handle to open. Closets may be equipped with 12-volt lights that turn ON when the closet door is opened.

  • Page 47: Plumbing Systems And Holding Tanks

    Plumbing Systems And Holding Tanks The plumbing systems in your trailer are constructed of durable thermoplastic materials. Holding tanks and piping components are strong, lightweight, and corrosion resistant. Holding tanks are of three types: 1. Fresh - Fresh potable water 2.

  • Page 48: Draining Fresh Water Tank

    Never allow the water tank to be filled unattended. Damage caused by overfilling of fresh water tank is considered misuse and is not covered by Outdoors RV warranty. Since water pressure at campgrounds vary, we recommend you install an in-line pressure regulator at the water supply faucet.

  • Page 49: Troubleshooting The Fresh Water System

    If you experience this type of damage, repairs can best be made by an authorized Outdoors RV dealer. For your safety, the shower faucet is equipped with a vacuum breaker device. This device is designed to prevent backflow of water into the fresh water system, reducing the possibility of contamination of the water supply.

  • Page 50: Waste Water System

    Plumbing Systems -continued 3. Turn water pump switch ON. (Be sure you have 12-volt DC power.) Open all faucets individually until water flows steadily, then turn them off. This will purge any air from lines. 4. Top off water tank with fresh water and allow the system to stand for at least 4 hours. 5.
  • Page 51 Plumbing System -continued Toilet Your trailer is equipped with a marine-type toilet. The flushing mechanism, whether a foot-operated pedal or hand-operated lever, allows a valve in the bottom of the bowl to open, permitting the contents to be flushed into the "black" holding tank. A stream of water under pressure from the trailer water system swirls around the bowl, cleaning it and flushing the contents into the holding tank.
  • Page 52 Plumbing System - continued To drain the holding tank: 1. Attach the sewer hose to the holding tank outlet. Insert the end of the hose into the sewer or dump station inlet, pushing it firmly far enough into the opening to be secure.
  • Page 53 Plumbing System - continued Holding Tank Care Since holding tanks don't rely on any sophisticated mechanical devices for their operation, they are virtually trouble-free. The most common problem is also an unpleasant one - clogging. You can minimize the chances of clogging by keeping the following considerations in mind. 1.

  • Page 54: Electrical

    ELECTRICAL SYSTEMS The electrical systems in your trailer are designed and installed in accordance with all codes, regulations, and standards in effect at the time the trailer was built. There are three basic systems in your trailer. The 120-volt AC system is similar to that in your house: it is supplied by an external service connection, or by a generator set.

  • Page 55: The Power Distribution Center

    ▲ Note The 12-volt battery is not supplied with the trailer by Outdoors RV. Check any installed battery manufacturer specifications and requirements for use. The converter will supply a small current to the battery even when it is fully charged. To prevent excess electrolyte loss, check the levels every 30 days when the converter is connected to 120-volt AC power.

  • Page 56: Volt Dc System Exterior

    When the trailer battery requires replacement, always choose a battery with the same physical and electrical characteristics as the original equipment. We recommend an RV / marine deep cycle battery. Your dealer or any other or authorized Outdoors RV dealer can advise you on proper battery selection.
  • Page 57 Electrical System - continued Check the external condition of the battery monthly. Look for cracks in the cover and case. Check the vent plugs. Replace them if they are cracked or broken. Keep the battery and terminals clean. Accumulations of acid film and dirt may permit current to flow between the terminals and discharge the battery.
  • Page 58 Electrical System - continued Optional-12 Volt Tank Heater 12 Volt Tank Heating Pad Optional equipment on the following Models: 1. Creekside 23 RKS Creekside 26 BKS Creekside 26 RLS 2. All Timber Ridge Models 3. All Wind River Models 4. All Black Stone Models NOTE: The volt 12 Tank Heater is controlled by a switch from within the RV.

  • Page 59: Solar Panel

    Electrical System - continued Solar Panel 10 Watt 10 Watt Solar Panel is standard equipment on the Creek Side, Timber Ridge, Wind River, and Blackstone products. General Specifications: Power / PMAX 10 Watt Voltage / VMPP 17.5 Current / IMPP (AMP) 0.58 Dimension / (INCH) 7 x 11 x 1 Weight / IB.
  • Page 60 Electrical System - continued Optional-Zamp Solar Power 95 Watt Optional Equipment: Available option for Creek Side, Timber Ridge, Wind River, and Black Stone. Each Zamp Solar Module produces up to 95 watts of DC power with 5.3 amps at 17.9 volts of DC in full sunlight and has a 25 year limited warranty on power output.

  • Page 61: Propane System

    PROPANE SYSTEM Propane is available from an approved storage container to operate your range, oven, furnace and water heater and as an alternate energy source for some refrigerators. With proper handling precautions, Propane is safe and provides modern convenience wherever you travel.
  • Page 62 Propane System -continued ▲ Warning 7. Turn off Propane main valve before filling Propane container or entering a Propane bulk plant or motor fuel station. Turn off all pilot lights and appliances individually before refueling of motor fuel tanks and/or Propane containers. When not individually turned off, automatic ignition appliances may continue to spark when Propane is turned off at the container.

  • Page 63: System Components

    System Components Hoses and Fittings The hoses used in your propane system meet stringent requirements, and are rated to withstand many times the pressures encountered in the system. Check the hoses for weather checking or signs of deterioration every time you have a Propane cylinder filled or serviced. When you replace hoses, be sure that replacements are the same size, properly rated and approved for RV use.

  • Page 64: Propane System Check

    Using Propane System At Low Temperature Your Propane system will function at low temperature, provided the system components are kept at a temperature above the vapor point of the Propane. Ask your Propane supplier or your travel trailer dealer for information on product blends available in your area and the areas in which you will be traveling.
  • Page 65 Filling Propane Cylinders To fill storage cylinders, the cylinders must be removed from the trailer and taken to a Propane supplier or one of the service stations which sell Propane. Do not attempt to fill the Propane tank yourself. ▲ Warning Do not fill Propane containers to more than 80% capacity.

  • Page 66: Propane Leak Detector

    7. If the alarm does not sound during a test or if the green indicator light is not visible, see your dealer or any authorized Outdoors RV dealer. There are no batteries or user serviceable parts inside the unit.

  • Page 67: Lighting Propane Appliances

    Lighting Propane Appliances Detailed operating information for Propane appliances can be found in your Owner's Information Package. Please read and follow these instructions. Air trapped in the Propane lines may delay the initial lighting of any appliance. It could take several seconds or minutes for the Propane to reach the appliance.

  • Page 68: Appliances

    Propane System - continued What to do if you smell gas 1. Do not try to light appliances. 2. Extinguish any open flames including cigarettes. 3. DO NOT TOUCH ANY ELECTRIC SWITCH. 4. Open windows and doors. 5. Exit trailer. 6.
  • Page 69 APPLIANCES AND EQUPIMENT TV Antenna The television antenna installed is designed for either color or black-and-white television. If reception is poor, make sure the power supply switch is on and connections are tight. Should the reception remain poor, check with your authorized dealer. Awning, Patio _Electric Standard on Creek Side /Timber Ridge/Wind River/Black Stone One step electric awning operating and maintenance guide is included in your Owners Information Packet.
  • Page 70 If heavy rain is predicted, or whenever you leave the awning unattended, it is best to close the awning. Damage to the awning or unit due to weather is not covered under the Outdoors RV Manufacturing Limited Warranty or the awning manufacturer warranty. ▼ Warning Do not attempt any repairs to the awning.
  • Page 71 Appliances and Equipment -continued Thermostat Outdoors RV travel trailers have either a heat only thermostat or a combination air conditioner / furnace thermostat if an air conditioner is equipped at the factory. Please refer to the user's manual for specific thermostat installed.
  • Page 72 Appliances and Equipment - continued Range Hood The range hood operates on 12V power and should be used as a ventilating system when cooking. Operational switches for the fan and / or light are on the front panel of the range hood. Care and Maintenance Care of the range hood is similar to the range.
  • Page 73 Appliances and Equipment - continued Oven Operation (if equipped) Oven pilot must be lit prior to operating. Lighting Oven Pilot Be sure all valves and oven control knob are in the "OFF" position. Assure the main gas supply is on. Open oven door and smell for gas. If odor present - Stop and: 1.

  • Page 74: Refrigerator

    Appliances and Equipment - continued Refrigerator The refrigerator installed is a LP gas appliance. Carefully read the manufacturer's manual for complete operational and safety instructions, provided in the unit packet, prior to using the appliance. Operation The refrigerator operates on either 120V AC or LP Gas and has a gravity-based cooling system. The cooling coils are sloped to allow continuous movement of the liquid chemicals and if the unit is not level for extended periods, the flow of these chemicals will slow and pool inside the tubing, resulting in a loss of cooling.
  • Page 75 Before beginning to operate the Girard Tankless Water Heater it is important to review the operation instructions in the Owner's Manual and review Usable Hot Water information. The Girard Owners Manual is shipped from the Outdoors RV Manufacturing plant with the trailer.
  • Page 76 Appliances and Equipment - continued Operation: Electric Fireplace Manual Controls: The manual controls for the fireplace are behind the access panel located at the bottom of the fireplace. 1. Heat On/Off Switch / Turns heat on or off. 2. Flame Action Control / Turn the flame action control knob to adjust the flame speed to the desired level.
  • Page 77 Appliances and Equipment - continued Fireplace Maintenance continued: Light Bulb Replacement: Allow at least five (5) minutes for the light bulbs to cool before touching them to avoid accidental burning of the skin. The light bulbs need to be replaced when you notice a dark section of the flame or when the clarity and detail of the log Ember Bed exterior reduces.
  • Page 78 Appliances and Equipment - continued Roof Vents Manual and / or power vents are installed on Outdoors RV travel trailers. For Fan-Tastic vent, see information on the specific product in this section. Operate the roof vents when showering, bathing ,washing dishes, or anytime hot water is used, as it allows moisture to escape.
  • Page 79 Appliances and equipment - continued Carbon Monoxide Detector A carbon monoxide (CO) detector is installed in your trailer. For specific information regarding the specific operation or function of the particular detector in your trailer, consult the individual manufacturer's owner's manual. Common sources of CO are malfunctioning or misuse of gas appliances, vehicle engines, generators and many other fuel burning products.
  • Page 80 Appliances and Equipment - continued ▲ Danger If the alarm sounds provide ventilation by opening windows and doors. The CO build up may dissipate before help arrives, but may be only temporarily solved. It is crucial that the source of the CO is determined and repaired. The CO alarm can only warn you in the presence of CO.
  • Page 81 Appliances and Equipment - continued Syncing the Remote to the Receiver- 1. To begin syncing the remote to the receiver, both the receiver and the remote must have power (12V DC for the receiver and the battery in the remote must have a charge) 2.

  • Page 82: Maintenance

    MAINTENANCE Your trailer has been designed to provide you with many years of use with a minimum amount of maintenance. This section will familiarize you with the areas of your trailer that require scheduled care. Time spent taking care of your trailer on a regular basis will pay for itself in extended service and will help protect your investment.
  • Page 83 Maintenance - continued Sheetmetal Care (If Applicable) Sheetmetal Siding Cleaning and Care / Painted Surfaces Cleaning of fabricated pre-painted coil should be done in shaded conditions or ideally on a mild, cloudy day once to twice a month with a quality car wash or Simple Green solution. Always follow the cleaner manufacturers instructions for care and cleaning.
  • Page 84 Non-water soluble stains usually oil-based. Removal of this type of stain may require the use of highly flammable or poisonous solvents. Refer this type of service to your dealer or an authorized Outdoors RV dealer. Never use strong solvents or abrasives to clean plastic surfaces. Exterior Graphic Care The pressure sensitive graphics installed on the exterior surface of your trailer require little maintenance and should be treated similarly to a painted surface.

  • Page 85: Windows, Doors, Vents And Locks

    Maintenance - continued Windows, Doors, Vents and Locks Keep moving parts, hinges and latches adjusted and maintained. Lubricate with light oil at least once a year. Check and tighten the screws holding the window in place as required. Clean screens by gently wiping with a damp cloth or soft flat brush.
  • Page 86 Maintenance - continued INTERIOR Fabrics Interior appointments such as draperies, bedspreads, mattress covers, upholstery and wall pads are manufactured from high quality materials and should be dry cleaned only. Frequent vacuuming will keep them free of dust and dirt. Minor spills should be cleaned up quickly to avoid staining. The affected area should be blotted, not rubbed, to prevent the stain from working deeper into the fabric.
  • Page 87 Maintenance - continued Satin ( blending ): Apply a mild abrasive cleaner such as Soft ScrubR and a damp sponge, buff in a circular motion. Then rinse and towel dry. If additional blending is necessary lightly buff with a gray ( 7448 ) Scotch-BriteTM pad then rinse and towel dry. Maintenance - Cont.
  • Page 88 This and similar tools are available in most hardware stores and home improvement centers. When you install a component, carefully mark the hole location and drill a 3/16" hole where the rivet is to be located. If you need rivets, contact your Outdoors RV dealer. ▲ Caution Do not use any type of screw to attach items to the interior or exterior walls of your trailer.

  • Page 89: Wheels And Tires

    Maintenance - continued WHEELS AND TIRES Tire Inspection To obtain maximum tire life, inspect tires for wear and damage before the start of each trip. When the average tread depth reaches only 1/16" at two adjacent tread ribs, replace the tire. Look for abnormal wear patterns such as cupping, feathering, or rapid wear of either the inside or outside of the tread.

  • Page 90: Battery Maintenance

    Wheel Replacement Replacement wheels must be of the same size, type, and load capacity as the original equipment. See your authorized Outdoors RV dealer to obtain correct replacement. Battery Maintenance And Care Refer to the Battery Inspection and Care section in this manual Electrical Information.
  • Page 91 Maintenance - continued Rubber Roof System The rubber roof will provide many years of protection with only routine maintenance. The roof material is constantly exposed to ultraviolet radiation from the sun, atmospheric contaminants, pollution, dust and other compounds. These materials react with each other and some compounds in the rubber roof material, and collect on the surface of the rubber.

  • Page 92: Maintenance Guideline

    Maintenance - continued Trailer A-Frames And Bumpers There is very little that can go wrong with trailer A-frames and bumpers. Periodically inspect all the hardware attached and tighten if necessary. A-frames and bumpers should be washed to prevent the buildup of road grime and dirt. Touch-up paint should be used on all scratches and paint chips to prevent rust.
  • Page 93 Maintenance - continued A - Each Trip or Monthly D - Every 6 Months B - Weekly E - Each Year C - Every 3 Months F - At Specified Mileage or Interval ▲ - Severe Climate and/or Extreme Use Maintenance Inspect and clean appliance vents, water heater, furnace, etc.

  • Page 94: Storage

    STORAGE STORAGE CHECKLISTS The following checklists will help you perform the steps necessary to prepare your trailer for storage conditions you anticipate. These checklist do not include every detail required, and you may want to expand them to suit your needs. Contact your dealer for additional suggestions suitable to your climate and storage conditions, particularly extremes of hot and cold.
  • Page 95 Storage - continued 11. Turn off Propane at the cylinder valve. 12. Turn off refrigerator and furnace. 13. Turn off range and oven burner valves and pilot valve (if equipped). 14. Remove all perishables from refrigerator and galley cabinets. Block refrigerator door(s) open to reduce odor buildup.
  • Page 96 Storage - continued Long-Term Storage (Over 60 Days) 1. Perform all steps as required for short-term storage. 2. Operate air conditioner(s) to lubricate compressor seals. 3. Charge and remove the battery. Store in a cool, dry place, and check the charge and water level every 30 days.

  • Page 97: Winterization

    Storage - Continued WINTERIZATION Thoughtful planning and preparation for the winter season can help eliminate equipment failures and breakdowns, and can extend the life of your trailer and its systems. Your dealer can advise you concerning specific winterization procedures and products for your climate area or the areas through which you will be traveling. Your dealer may also provide winterization service for all appliance and systems in the trailer.
  • Page 98 Storage - continued 11. Apply silicone lubrication to the knife valve actuator rod(s). 12. Be sure ALL water from ALL plumbing fixtures has been drained. 13. Close holding tank drain valves. 14. Locate water pump, and close the winterization pick-up tube valve next to the water pump. 16.

  • Page 99: Reactivating The Trailer After Storage

    If the trailer was properly and carefully prepared for storage, taking it out of storage will not be difficult. The following procedure check list assumes that you stored the trailer with care. If you didn't, and extensive freeze damage or other serious deterioration has occurred, please consult your dealer or any authorized Outdoors RV dealer for advice.
  • Page 100 17. Inspect the 120-volt electrical system - power cord, converter, all outlets, and any exposed wiring. If defects are found, refer service to your dealer or an authorized Outdoors RV Dealer. 18. Prepare the generator for operation following instructions in the generator operating manual in your Owner's Information Package.

  • Page 101: Glossary

    Owner's Information Package - This is a package of papers, manuals, warranty and instruction cards, and other material put together for you by Outdoors RV. These materials contain operating and maintenance instructions for most of the components and appliances in your trailer.

This manual is also suitable for:

2013 timber ridge2013 creek side2015 creekside 23 rks2015 creekside 26 bks2015 creekside 26 rls2015 timber ridge ... Show all

Table of Contents