Table of Contents
Advertisement
X-DAC
V8
I s s u e 1 : 1 9 ' h O c t o b e r 2 0 0 6
INSTALLATION PRECAUTIONS and USER INFORMATION
Your new X-DAC
v8
is designed and built to provide trouble-free performance, but as with all electronic devices it is
necessary to observe a few orecautions:
Heed all wamings shown on the back ofthe product.
Only connect the X-DAC v8 to a mains outlet having the same voltage as marked at the back ofthe unit.
Always ensure that when disconnecting and reconnecting your audio equipment the mains supply is switched
off.
Position the mains lead and signal interconnects where they are not likely to be walked on or trapped by items
placed on them.
Do not use near water, or place water-filled containers on the X-DAC v8, for example, a flower vase or potted
plants. If water does spill inside, immediately pull out the mains plug from the wall socket and inform
your dealer, who should then check the unit before further use. Entry of liquid into the X-DAC vE is
dangerous, and may cause electric shock or fire hazard.
Do not place the unit near direct heat sources such as radiators, direct sunlight or other equipment.
Do not remove any covers or try to gain access to the inside. There are no internal adjustments or fuses you
can replace yourself. Refer all service work to an authorised Musical Fidelity agent.
Note: Unauthorised opening of the equipment will invalidate any warranty claim.
Dust regularly with a soft cloth or soft brush but be careful when using cleaning or polishing agents - they may
harm the surface finish.
The electronics in modem hi-fi equipment is complex and may, therefore, be adversely affected or damaged by
lightning. For protection ofyour audio system during electrical storms, remove the mains plugs and disconnect any
aerial lead.
If after-sales service is required, to help your dealer identify the X-DAC vE please quote the serial number located on
the rear nanel ofthe unit.
Advertisement
Table of Contents
