Table of Contents
Advertisement
To change, remove the windscreen from the microphone and carefully attach
the new windscreen.
8.2.7 Headset detection
If you want to operate the radio unit and the headset is connected, you do not
need to remove the entire headset from the radio unit. The headset upper part
can be separated at the detachable connection by gently pulling it. Doing this
ensures all of the functions on the radio unit are active, despite the headset
lower part still being connected.
8.2.8 Maintenance instructions
Wipe the headset every now and then using a soft cloth moistened with just
water. When cleaning do not use any alcohol or other cleaning agent.
For hygienic reasons we recommend changing the windscreen every six
months.
CAUTION:
Check the receiving volume every time before using the headset; adjust if
necessary. Signals that are too loud can permanently damage your hearing.
8.3 Ex-TRA Fire Brigade Headset
8.3.1 Assembling to the DIN helmet
Screw the helmet adapter to the helmet. Unscrew the knurled screw to open
the bracket slightly, thus enabling it to be slid easily over the rim of the helmet.
Arrange the helmet adapter in such a way that the side slots of the tube point
towards your ear. Now tighten the knurled screw.
8.3.2 Assembling to the Schuberth F-200 helmet
To assemble the special F-200 helmet attachment push the metal clip into one
of the side retainers on the helmet until it engages in place. To disassemble
press the release button with the inscription „F200".
8.3.3 Assembling to the Gallet / Dräger helmet
17
Advertisement
Table of Contents
