Page 1
Instructi Instructi Instructi Instructions for use ons for use ons for use ons for use NB: Keep these instructions NB: Keep these instructions NB: Keep these instructions NB: Keep these instructions for future reference! for future reference! for future reference! for future reference!
Page 2
• Four-position seat unit • Compatible with “Römer Baby-Safe plus SHR” car seat • Swivel mode and locked setting on front wheels • Compatible with ABC Design “Carrycot for Zoom” • Tested for conformity with EN 1888:2005 Safety instructions Safety instructions...
Page 3
- This model is suitable for infants from 6 months (from birth with carrycot) and up to a maximum weight of 15 kg. - The net bag can carry up to 2 kg. - This stroller is suitable for maximum 2 Children. - Do not use any accessories other than those approved by the manufacturer.
Page 4
1. Opening the pushchair Then pull the bar-type handle up until the frame engages. CAUTION: Ensure that all the catches are engaged before use. 2. Fitting the wheels Press the button (1) and insert the rear wheel in the slot (2) until it engages. To remove the wheels, press the button (1) to release the wheels.
Page 5
3. Wheel locking and swivel settings Push the lever downwards to lock the wheels. Push the lever upwards for swivel position. 4. Operating the brake Press the lever down to engage the brake. Press the lever up to disengage the brake. NB: The brake must always be applied before lifting the children in and out of the buggy.
Page 6
7. Fitting and changing the Comfort Set Seat liner: Undo the strap. For more information, follow the instructions in section 9. Then pull the crotch belt through the opening in the seat liner. Fix the tab on the head end of the seat liner with the Velcro fastening on the backrest.
Page 7
8. Fitting and removing the guard rail Fit the guard rail by inserting it in the plastic mounts on both sides. To remove the guard rail from the pushchair, press in the buttons on both sides and pull the guard rail off away from the pushchair. 9.
Page 8
12. Adjusting the seat unit To adjust the seat unit, press and hold down the catches on both sides of the seat unit and adjust the height of the seat. When you have reached the required position, let go of the catches to allow the seat to remain in that position.
Need help?
Do you have a question about the ZOOM and is the answer not in the manual?
Questions and answers