Weego JS12 Owner's Manual page 6

Charging a Phone, tablet or Other uSB devices
The Weego Jump Starter JS12 comes with one
USB charging port located at the side of the unit:
• Plug the USB cable into the USB outlet on
the Weego Jump Starter located next
to the flashlight on the side of the unit.
• Select appropriate connector and
connect it to your smartphone, tablet
or USB device you want to charge.
• Power on the Weego and start charging!
Flashlight
The Weego Jump Starter comes with LED flashlight that has a number of
different settings:
• Press the on/off switch for 3 seconds to start
the LED flashlight. There are 3 modes of LED
light that appear in the following order:
1st click: Normal
2nd click: Strobe
Charging a Laptop
The Weego Jump Starter provides you with 8 tips and an adaptor to charge a
variety of popular laptops including: Acer, Dell, Fujitsu, HP, IBM, Lenovo, Sam-
sung, Sony and Toshiba.
The Weego has two outputs (12V and 19V) which are able to charge your
laptop. We highly recommend that you check your laptop's charger (voltage
specification found on actual charger) or read your laptop's owner's manual
5
3rd click: SOS
4th click: OFF
to find out what voltage your laptop requires. Once
this information is obtained, use the output
voltage closest to that of your lap-
top's voltage requirement.
• Select the appropriate charger
tip for your laptop
• Plug the adaptor cable into
the 19V or 12V output
• Turn the Weego unit on and
start charging!