Mode Button; Sync Mode; Charge Mode; Disconnected Mode - Leba NoteSync Instructions Manual

Mode button

Sync mode

Pressing the mode button makes the NoteSync switch between three modes.
Press the mode button and the green LED will flash. After a few seconds flashing will
stop. The green LED shows that the unit is in Sync mode.
In this mode you can sync all units simultaneously.
Simply start up iTunes on your master and you will see all connected units in iTunes.
If all units are set up under iTunes, sync will start automatically across them all.

Charge mode

Pressing the mode button again makes the green LED turn of and the red LED will
start flashing. When the red LED lights up, the unit is in charging mode.
All USB ports are now charging units connected.

Disconnected mode

Pressing the mode button again makes the green and red LED turn off. The unit is
now in disconnected mode. Same effect as removing all cables to connected devices.
6