Home WiFi around your home. If you have any difficulties or need to speak to a Qtel specialist, please call us on 111.
Page 3
Step 7: Configure “Routed Internet Connection”. VPI/VCI = 8.35 Connection Type = PPP over Ethernet (PPPoE) Click on Next Step 8: Enter the Qtel ADSL user name and password (unique for each user). User Name = xxxxxxxx Password = ************** Click on Next Qtel’s ADSL customers are...
Page 4
Step 9: Enter the user credentials (common for all users). User name = Administrator Password = connect2th Click on Next Step 10: Please wait until the device is configured “Configuring your Thomson Gateway” “Please wait …”. Wait until the window shows “Completing the Thomson Gateway easy Setup” Click on Finish to close the set-up.
Page 5
Step 12: On the computer open Internet Explorer browser, in the address bar type http://192.168.1.254, page display. Verify under Broadband Connection “Connected” as shown below:...
Page 6
CHANGING WIRELESS SSID AND WEP SECURITY SSID: is wireless or WiFi network name on your router WEP Security: is your wireless or WiFi network password Step 13: On the computer open Internet Explorer browser, in the address bar type http://192.168.1.254, page display. Click on Home and then on Wireless.
Page 8
Step 15: Configure Wireless To enable WiFi, tick on Interface Enable. To change SSID, enter the desired name at “Network Name (SSID)”. To enable WEP security, select: “Use WEP Encryption” WEP Key Length = 64 bit WEP Encryption Key = xxxxxxx To save changes, click on Apply.
Need help?
Do you have a question about the ADSL WiFi Router and is the answer not in the manual?
Questions and answers