Advertisement
Available languages
Available languages
Assembling the machine
1. Put the connector on to the
main base. Then lock the two
clips to the connector tightly
(If you don't lock tightly, the
motor will be auto protected
and will not run).
2. Put all the food into the jar
with some water, then put the
cover onto the top of the
blender jar. Push the jar onto
the connector perpendicularly
, spin the jar until it tightly links
to the connector.(Attention:
The blender handle must be
align with clamp) Don't run
the machine when there is
nothing in the jar. Be sure that
there must be some water or
liquid in it. The volume cannot
exceed 1000 ml. and the
temperature not higher than
60 C.
3. Put the food into the wet
mill, then put the knife base
onto the mouth of the mill and
spin tightly. Then put the mill
perpendicularly
connector, spin until the mill
lock with the connector firmly.
on
the
4. The juice cup is transparent
with some measure on it. You
can see the effect directly
when using.
Make juice
1. First husk the fruits and take
out the stones, then cut into
pieces.
2. Assemble the machine as
"Juicer parts name", then plug
in the power cord to the outlet.
After running without anything
for 5 seconds, put the prepared
fruit into the input mouth. You
can use the pusher to make the
fruit come into the machine
more easily. The delicious juice
is coming out for you now.
Wet mill
1. Take the stone, skin, and the
solid things out of the meat,
then cut into pieces about 2x2
cm. Put 120g of meat each
time into the wet mill and then
put the knife base onto the
mouth of it. Run the machine
for 5-10 seconds.
2. It is better to put some oil
and sauce with the meat when
blending.
11
Advertisement
