Film Loading - Honeywell ESII User Manual

FILM UNLOADING
After the final picture on the
roll has been taken, the rapid
wind lever will not turn, indi-
cating that the film must be
rewound.
Lift the rewind crank up. De-
press the film rewind release
button and turn the rewind
crank as indicated to rewind
the film into its cassette. Re-
wind until the tension on the
crank lessens, indicating that
the leader end of the film has
been released from the take-up
spool.
Pull out the film rewind knob
(the back will open automati-
cally), and remove the film
cassette. AVOID DIRECT
LIGHT WHEN LOADING OR
UNLOADING THE FILM.
18