Srv-212; Introduction; Warning; Specifications - Motion Sound SRV-212 Quick Start Setup Manual

2
The SRV-212 is a rotary speaker cabinet designed to be driven
by any amplifier that can safely drive a 4-ohm load. It is
shipped with two Eminence™ Sreamin' Eagle speakers wired
in parallel. Maximum power input is 100 watts RMS.
Caution if you are not sure of your amplifiers load
capability, contact it's manufacturer before
connecting to the SRV-212
Motion Sound has been successfully manufacturing several types of rotary speakers since 1995.
The SRV-212 is the second generation of guitar rotary speakers. We have incorporated many
suggestions from musicians into the SRV-212 and added our many years of experience into it's
features and performance. The SRV-212 defines the guitar rotary speaker standard.
-The SRV-212 can produce high sound pressure levels, hearing protection is advised!-
-The SRV-212 must be earthed and connected to correct power for safe operation-
•
Input connector
•
Input impedance
•
Power level Up to 100 watts RMS (with supplied speakers).
•
Speakers Two Eminence™ 8 ohm Screamin' Eagles. (Wired in Parallel).
•
Fuse Located in AC inlet module.
Power Voltage
USA 117 VAC
Europe 220-240 VAC
Australia 220-240 VAC
Japan 100 Vac
•
Finish Two part polymaric™ on MDF (Proprietary Polymer)
•
Dimensions 24.5" H

SRV-212

-Introduction-

-Warning-

-Specifications-

¼" speaker input jack on rear panel. (ground isolated)
4 ohms (with supplied speakers).
Frequency
60 Hz
50 Hz
50 Hz
60 Hz
20" W
Watts Fuse (slo-blow)
50 1 Amp
50 .5 Amp
50 .5 Amp
50 1 Amp
17" D 64 Lbs.
2