DMC-TZ5 Digital Camera Firmware Installation Instructions Table of Contents Table of Contents ....................1 Check Firmware Version ................... 2 Preparation of SD Card ..................3 Download Firmware ..................3 Copy Firmware to SD Card ................4 4.1 Using SEND TO.................... 4 4.2 Using COPY &...
5) Power the camera OFF after checking the firmware version. CAUTION: If the firmware version in the camera is the same or higher than the firmware version downloaded or received, a firmware update is unnecessary. DMC-TZ5 Digital Camera Firmware Installation Instructions Page 2 of 7...
4) Remove SD Card from camera. 5) Power the camera off. Download Firmware 1) Left click on the DOWNLOAD icon for the DMC-TZ5 Digital Camera firmware. - DMC-TZ5 Digital Camera Firmware Update 2) Left click on SAVE. The file name displayed should be TZ5_a.bin.
2) Right click on the TZ5_a.bin icon on the DESKTOP and then left click on COPY. 3) Double click on the MY COMPUTER (XP) or COMPUTER (Vista) icon on the DESKTOP. DMC-TZ5 Digital Camera Firmware Installation Instructions Page 4 of 7...
SD Card.) 2) Left click on the TZ5_a.bin icon on the DESKTOP, hold down the left mouse button, and drag the file to the SD CARD DRIVE icon on the DESKTOP. DMC-TZ5 Digital Camera Firmware Installation Instructions Page 5 of 7...
Figure 1 will not be displayed. Instead, NO VALID PICTURE TO PLAY will be displayed. Please turn off the camera, remove the SD Card with the firmware update, and use the camera as is. DMC-TZ5 Digital Camera Firmware Installation Instructions Page 6 of 7...
Page 7
The camera will also be reset to the initial mode. 8) Set the camera’s Power Switch to OFF. 9) Remove the SD Card. 10) Use the steps in the Check Firmware Version section to verify the firmware version. DMC-TZ5 Digital Camera Firmware Installation Instructions Page 7 of 7...