Making Executables; Checking Syntax - Denso WINCAPS III Manual

Chapter 5 Writing Programs
5.8

Making Executables

5.8.1

Checking syntax

The following procedure runs a syntax check on the selected program.
Note
The target is the file in the currently active Program edit window.
Operating procedure
1.
Select the program to check.
2.
Choose Project|Check Syntax to run the check and display the results in an Output win-
dow.
A syntax error triggers an error message consisting of an indication,
note in the Output window.
Double-clicking on this message highlights the corresponding line in reverse in a Program edit window.
Note
There is an option for automatically running this check on the program after each save.
Choose Project|Properties to display the project property sheets and look for it on the Compiler tab.
88
, the line number, and a brief