Page 1
CD player CD-1200M Hi-Fi stereo CD player with MP3 playback Similiar to illustration Available in: Black Edition › White Edition › Silver Edition Instruction manual...
Safety information Chapter 10 Specifi cations Before use Technical data Chapter 3 The device Delivery contents Features The CD-1200M Description of remote controls Inserting batteries into the remote controls/Battery information Chapter 4 Setup Chapter 5 Connections Analog connection Digital connection...
Intended use Dear Customer: The X4-TECH CD-1200M player is intended for playing audio CDs and CDs containing MP3 and WMA fi les. Furthermore, it is capable of playing MP3 and WMA fi les stored on external storage Thank you for deciding on purchasing this quality product from X4-TECH.
Safety information Dear Customer: › Always pull on the plug’s grips and never on the cable to remove from a wall outlet. The following safety and hazard warnings are not only for the protection of your device, but also › Unplug the device from the power outlet, if it is not in use for a longer period of time. serve as a protection against potential health hazards.
› Never touch the power plug with damp or wet hands. There is the risk of electric Before use shock! Please read this instruction manual thoroughly before operating this device and retain it for fur- › Make sure the device is properly ventilated during operation and never operate it in ther reference, questions and use.
5. Previous › Infrared system remote control 6. Next 7. Play/Pause / 8. Stop The CD-1200M 9. Open/Close CD compartment 10. CD compartment › This device is equipped with a class 1 laser. 11. Power button on/off ›...
Model 1 Starts/Pauses playing a CD This remote control is suitable for use with the following X4-TECH Hi-Fi components/systems: the TU-1200, the silver A-1200, the silver CD-1200M and the Hi-Fi Sound System 1200. 13. Stops playing a CD Tuner TU-1200 1.
Page 8
This remote control is suitable for use with the Regulates bass settings following X4-TECH Hi-Fi components/systems: the IR-1200, the A-1200, the CD-1200M and the 12. Source selection Hi-Fi Sound System 1200IR. You can use these buttons to select the signal input to be used on your amplifi er:...
18. ST/MO Inserting batteries into the remote control/Battery information Switches between a two-channel stereo and one-channel mono operation mode Inserting/changing batteries 19. / Play/Pause › Carefully remove the battery compartment lid on the back of the remote control. Starts/Pauses playback ›...
Setup Selecting a proper location should be taken into consideration before setting up your device, for example the distance to the next power outlet, avoiding areas where the device may be exposed to direct sunlight, vibration, dust, heat, cold and moisture, as well as keeping it away from transformers or motors.
Connecting the device to a power supply Before attempting to make connections, ensure that the CD-1200M is not connected to an electrical power supply. › After connections have been made, plug the amplifi er’s power plug into a power outlet (AC 230 V~/50 Hz) of your public power system.
› Press the button to stop playback. Intro › The CD-1200M is unable to › Press the INTRO button to activate this function („I” will appear on display). The player will now display tracks correctly if the total play the fi rst ten seconds of each song before skipping to the next.
Repeat › This device supports two repeat mode options. Never use any solvents or chemicals, such as alcohol, benzine, thinners, any commercially availa- › Press the REPEAT button once to repeat the current track continually (REPEAT 1). ble cleaners or antistatic sprays for records to clean discs ›...
Troubleshooting The industry is tending to gradually change back to CDs that are not copy protected, due to the The device you have just purchased is equipped with state-of-the-art technology and is safe to many problems that DVD players, car radios and other portable playback units are having with operate.
Maintenance and cleaning Carry out a technical safety inspection on a regular basis, e.g. check if the power cable or housing Cleaning the device may have become damaged. › Unplug the power cable before cleaning. Always use a soft and dry cloth to clean the unit’s exterior.
Need help?
Do you have a question about the CD-1200M and is the answer not in the manual?
Questions and answers