Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Santec SVS-3001
Summary of Contents for Santec SVS-3001
- Page 1 USER MANUAL 1-Channel IP Video Server Model: SVS-3001 Version 1.0sfi/0312/engl/A6...
- Page 2 Please follow all instructions and observe the warnings contained in this manual. Please contact your local dealer or SANTEC directly if you have any questions or if you wish to claim for a service or warranty. You will find further information on our website: www.santec-video.com...
-
Page 3: Table Of Contents
User Manual SVS-3001 Table of contents Safety precautions Safety instructions About this user manual Quick installation guide PART I: CONNECTIONS; CABLING, TECHNICAL SPECIFICATIONS 1. General 1.1 Included items 1.2 System requirements 2. Connectors and ports 3. Connection of hardware components 4. - Page 4 User Manual SVS-3001 2.6. Schedule 2.6.1 General 2.6.2 Storage 2.7 Network 2.7.1 General 2.7.2 Advanced 2.7.3 SMTP (e-mail) 2.7.4 DDNS 2.8 System 2.8.1 Information 2.8.2 User 2.8.3 Date & time 2.8.4 Server maintenance 2.8.5 Log service Appendix: Install UPnP components...
-
Page 5: Safety Precautions
User Manual SVS-3001 Safety precautions Caution Description of symbols Danger: This symbol is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to a person. -
Page 6: Safety Instructions
User Manual SVS-3001 Safety instructions Before operating the appliance, please read this manual carefully and retain it for further reference. Before cleaning the appliance, it has to be switched off and unplugged from the power outlet. Wipe the appliance with a soft damp cloth. -
Page 7: About This User Manual
About this user manual This manual aims at assisting the user on how to operate the video server SVS-3001. This manual is subject to rigid quality control. However, no guarantee can be given that mistakes are not present. We reserve the right to make changes to the manual without prior notice. -
Page 8: Quick Installation Guide
To operate the video server, please follow these steps: 1. Connect the hardware components as follows: 1. Prepare a PC/laptop with an Ethernet link to the network. 2. Connect the SVS-3001 video server to a network hub/switch with a standard pass through (CAT5) cable. You may also connect... -
Page 9: General
SVS-3001 Part I: Connection, installation, technical specifications 1. General The SANTEC 1-channel IP video server SVS-3001 can encode and transmit video signals from analogue cameras into an IP signal with MJPEG or H.264 compression. 1.1 Items included in the delivery... -
Page 10: Connectors And Ports
User Manual SVS-3001 2. Connectors and ports Front view: Audio output Video output Video input Audio input Terminator Rear view: Reset Com/GPIO 2x USB ports Power (12 V DC) LAN port _________________________________________________________________________________ - 10 -... -
Page 11: Connection Of Hardware Components
3. Connection of hardware components Prepare a PC/laptop with an Ethernet link to the network. Connect the SVS-3001 video server to a network hub/switch with a standard pass through (CAT5) cable. You may also connect SVS-3001 directly to the PC/laptop using a cross over cable. -
Page 12: Technical Specifications
User Manual SVS-3001 4. Technical specifications Device SVS-3001 Type 1-channel video server Video input/output 1x BNC / 1x BNC Compression (video) MJPEG / H.264 Number of video streams Resolution D1, 2CIF, CIF, QCIF Max. frame rate 25 fps at D1 (720x576) -
Page 13: Appendix: Setup Internet Security
User Manual SVS-3001 Appendix: Internet security setup If ActiveX control installation is blocked, please either set the Internet security level to default or change ActiveX controls and plug-in settings. Internet security level: Default: 1. Open the „Internet Options“ menu. 2. Select “Security”. -
Page 14: General
Part II: Control via the web 1. General The SVS-3001 video server is equipped with a user-friendly browser-based configuration interface. In this part of the user manual, information on system related settings and control options will be described in detail. -
Page 15: Live View
User Manual SVS-3001 2.2 Live view Admin button Language (go to administration page) setting PTZ control panel Action buttons Channel selection (Full screen, talk, speaker, snapshot, recording) Supported languages: On the live view page, you can select your language by clicking on the respective flag icon: English or German. - Page 16 User Manual SVS-3001 Action buttons: Full screen Click this button to display the live image as full screen. To exit the full screen view and to return to the regular view, please double-click into the full screen image. Talk The talk function allows the local site to talk to the remote site. Click on the button to switch it to on/off.
- Page 17 PTZ presets: List of presets. Alternatively, instead of using the PTZ control panel, you may simply click into the live view picture to move it (SANTEC “EasyViewPTZ” technology). Note: The OSD button (in the middle of the control panel) and the tour function are only available using a Pelco protocol.
-
Page 18: Video
User Manual SVS-3001 2.3 Video Under the tab <Video>, there are submenus including: <General> and <Advanced>. 2.3.1 General The video setting can be found under the path: Video > General Video general setting: The video stream can be enabled or disabled. Stream1 is enabled by default. -
Page 19: Advanced
User Manual SVS-3001 2.3.2 Advanced The video setting can be found under the path: Video > Advanced RTSP path: The RTSP path is the stream ID used for RTSP client streaming connection, such as VLC player. The default values are v00, v01 and v02 for the three streams respectively. The string can be any combination of number or capital/small letters. - Page 20 User Manual SVS-3001 Image format: H.264 and MJPEG are available for image format selection. The term “image format” is referring to compression/encoding technique. The selected image format influences the performance of bandwidth and storage requirement. With regards to video quality, H.264 contributes to less bandwidth and storage requirement, which is more efficient than MJPEG.
-
Page 21: Camera
User Manual SVS-3001 2.4 Camera Under the tab <Video>, there are submenus including: <General> and <PTZ>. 2.4.1 General The camera setting can be found under the path: Camera > General Camera general setting: Brightness: Luminance of image. Hue: Color hue can be modified. -
Page 22: Ptz
User Manual SVS-3001 2.4.2 PTZ The camera setting can be found under the path: Camera > PTZ PTZ status: Select “enable” or “disable. The PTZ control panel in live view is only displayed if the PTZ status is set to “enable”. -
Page 23: Event
User Manual SVS-3001 2.5 Event Under the tab <Event>, there are submenus including: <Event server>, <Motion detection>, <I/O ports> and <Event configuration>. 2.5.1 Event server The event setting can be found under the path: Event > Event server Add FTP: Name: Name the FTP server. - Page 24 User Manual SVS-3001 Add HTTP: Name: Enter the name of the HTTP server. URL: Enter the network address of the HTTP server. User name / password: Enter the user name and the password for the HTTP server. _________________________________________________________________________________ - 24 -...
-
Page 25: Motion Detection
User Manual SVS-3001 2.5.2 Motion detection The motion detection setting can be found under the path: Event > Motion detection. To create a motion detection area, follow these steps: 1. Click on “Add” to set-up a detection area. 2. Give a name to this window area. -
Page 26: I/O Ports
User Manual SVS-3001 2.5.3 I/O ports The I/O port setting can be found under the path: Event > I/O ports. This video server supports 2 photo-coupled relay inputs and 1 relay output. _________________________________________________________________________________ - 26 -... -
Page 27: Event Configuration
User Manual SVS-3001 2.5.4 Event configuration The event configuration setting can be found under the path: Event > Event configuration. To add an event trigger, follow these steps: 1. Click on “Add” and the setup panel will be expanded (as shown above). -
Page 28: Schedule
User Manual SVS-3001 2.6 Schedule Under the tab <Schedule>, there are submenus including: <General> and <Storage>. 2.6.1 General The schedule setting can be found under the path: Schedule > General. Follow the steps below on how to set a schedule: 1. -
Page 29: Storage
User Manual SVS-3001 2.6.2 Storage The schedule setting can be found under the path: Schedule > Storage. Here, information on the storage status is displayed. A message is displayed when a recording is currently running. Note: The USB storage device must not be removed from the USB port during the recording process. -
Page 30: Network
User Manual SVS-3001 2.7 Network Under the tab <Network>, there are submenus including: <General>, <Advanced>, <SMTP (e-mail)> and <DDNS>. 2.7.1 General The network setting can be found under the path: Network > General. On this page, the IP configuration is displayed including DHCP and static IP setting. -
Page 31: Advanced
User Manual SVS-3001 2.7.2 Advanced The network setting can be found under the path: Network > Advanced. NTP configuration: Users may configure a NTP (Network Time Protocol) server so that the camera’s system date and time can be synchronized with a specified time server or DHCP server. -
Page 32: Smtp (E-Mail)
User Manual SVS-3001 2.7.3 SMTP (e-mail) The network setting can be found under the path: Network > SNTP (e-mail). Configure an e-mail host for the camera which will send e-mails on behalf of the configured e-mail account to a specified mail address (also see the chapter “2.5.4 Event configuration”). -
Page 33: Ddns
User Manual SVS-3001 2.7.4 DDNS Check the box “DDNS enable” for dynamic DNS configuration. Host name: Assigned name that will be used for accessing the video server. User name / password: Account authentication for logging on to this service. Update time: Periodically, the camera updates its access information in the defined time. -
Page 34: System
User Manual SVS-3001 2.8 System Under the tab <System>, there are submenus including: <Information>, <User>, <Date & time>, <Server maintenance> and <Log service>. 2.8.1 Information The system setting can be found under the path: System > Information. On this page, a list of system and network configuration is displayed. These data are for information only and cannot be changed on this page. -
Page 35: User
User Manual SVS-3001 2.8.2 User Check the box “Enable anonymous login” if you don’t wish to have a user name displayed. 2.8.3 Date & time On this page, users may configure the system date and time as well as synchronization options with a PC and NTP server. -
Page 36: Server Maintenance
User Manual SVS-3001 2.8.4 Server maintenance This page provides some tools for system maintenance, such as firmware information and upgrades, backup and upload settings. 2.8.5 Log service Most system operations and/or processes will be kept in a log system. The link provides the review of these records. -
Page 37: Appendix: Install Upnp Components
User Manual SVS-3001 Appendix: Install UPnP components For Windows XP: Please proceed as follows to install UPnP for Windows XP: 1. Go to <Start>, then click on klicken dann auf <Control Panel> and double-click on <Add or Remove Programs>. 2. Click on <Software>. - Page 38 User Manual SVS-3001 Notes: _________________________________________________________________________________ - 38 -...
- Page 39 User Manual SVS-3001 Notes: _________________________________________________________________________________ - 39 -...
- Page 40 Your local distributor: __________________________________________________________________________ www.santec-video.com...
Need help?
Do you have a question about the SVS-3001 and is the answer not in the manual?
Questions and answers