Igo CE4+ User Manual

INSTRUCTION MANUAL
iGo CE4+

USER MANUAL

E-CIGARETTE
WHAT'S IN THE BOX:
Open the iGo CE4+ presentation box lid.
The top tierincludes:
2 x ecig covers with removable mouth piece & screw on.
2 x battery
2 x CE4+
Second tier includes :
1x juice bottle with needle
1x USB charging lead
1x adaptor plug
For safe and effective use of iGo CE4+, please read
through the following information carefully before using and
follow the standard operating procedures strictly.
<1>
INSTRUCTIONS FOR FIRST TIME USING:
Remove a battery from your box, screw into the charger lead,
connect the lead to the adapter plug & charge for the first time for
eight hours. The light on the charging lead will, at first red. It will
turn green when fully charged on a normal charge. Even when the
light turns green for the first charge, wait for eight hours to gainthe
best future performance of battery life. The subsequentchargewill
take considerably less time to charge.
Battery can be turned on/off by rapidly pressing the button 5 times.
Your iGo CE4+ will light up when the powers on. Batteries can also
be charged using a USB port.
Do not use the charger in damp areas. Do not charge the power
supply near a high-temp heat source. Do not weld or pierce the
power supply. If the power supply is found to be emitting any heat
or be discolored or deformed or have anyabnormality during
charging, please out off the power supplyfrom iGo CE4+ body or
charger or suspend the use of it. The iGo CE4+ charger can only
<2>
be used with iGo CE4+ dedicated power supply. Do not try to use
this charge on other kinds of power supply. Please keep the
iGo CE4+ components and tank atomizer from the reach of the
children or animals.
POWER SUPPLY REPLACEMENT:
The battery requires to be recharged when the kit produces no
more vapor. Unscrew the power supply battery off from the kit,
and screw the fully charged one on to continue vaporizing.
POWER SUPPLY:
Input voltage of the USB home charger is AC 100V-240V 50/60HZ.
Input voltage of the USB car charger is DC 12V-24V. Input voltage
of the USB battery charger is 5V, 500mA and the output voltage
is 4.2v 420mAh. Pay attention to the value of the local voltage to
be in accordance of that of the iGo CE4+ charger. iGo CE4+
<3>
<4>