Plantronics Blackwire C210-M Quick Setup Manual

Blackwire C210-M
™
Welcome:
Using a Plantronics Blackwire headset for PC
calls will deliver a simpler, more comfortable
and better sounding audio experience than
you could get using just your computer's
internal microphone and speaker.
A
B
C
*This picture shows the
Stereo (C220-M) version
Control Functions:
A. Mute Microphone
B. Volume Adjust
C. Call Answer/End
Blackwire C210-M/C220-M Key Features:

Wideband for best-in-class PC audio

Noise-canceling microphone filters out
background noise

Digital Signal Processing (DSP) technology
provides more natural voice sound

Monaural (C210-M), Stereo (C220-M)
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Blackwire, C210-M and C220-M are trademarks or registered trademarks of Plantronics, Inc. Microsoft and Lync are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries. Published 01.11
/C220-M

Quick Setup Guide

™ ™
Getting started:
The Plantronics Blackwire headset is ready to use
with your computer and Microsoft® Lync™.
1. Connect your headset to the computer.
If this is the first time you are connecting
the headset, wait for the installation
process to complete. Restart the
computer if directed to do so.
Configuring Microsoft Lync to always route call
audio to the headset:
2. Click on the drop down on the right side
of the main Microsoft Lync window.
3. Select the Audio Device option.
4. Choose your Plantronics headset for
Audio Device.
5. Check the Also Ring box for Secondary
Ringer and choose your PC speakers
from the drop down menu if you would
like them to ring for incoming calls.
6. In this screen you can also test and
adjust volumes.
7. Click Ok when finished.
Note: USB configuration settings are unique for
each USB port. If you connect the headset to a
different port you will need to make these
changes again to set behavior for that USB port.
3
5
2
4
5