IES Interactive Training 1229 Oak Valley Drive Ann Arbor, MI 48108 1-800-344-1707 http://www.ies-usa.com Extron Switch and Control Extension Setup Guide IES Interactive Training 1229 Oak Valley Drive Ann Arbor, MI 48108 1-800-344-1707 http://www.ies-usa.com...
Page 2
IES Interactive Training 1229 Oak Valley Drive Ann Arbor, MI 48108 1-800-344-1707 http://www.ies-usa.com 1. Inventory your equipment. There should be two Extron Electroincs box’s, one labeled DTP DVI 330 Tx and one labled DTP DVI 330 Rx. Out of these box’s you will only need the DTP DVI 330Tx and DTP DVI 330 Rx devices and the Power Supply for the 330 Tx.
Page 3
IES Interactive Training 1229 Oak Valley Drive Ann Arbor, MI 48108 1-800-344-1707 http://www.ies-usa.com 3. Connect the other end of the DVI cable from the computer to the 330 Tx switch control. 4. Connect the cat5 cable to the DTP out Ethernet port on the opposite end of the 330 Tx switch control.
Page 4
IES Interactive Training 1229 Oak Valley Drive Ann Arbor, MI 48108 1-800-344-1707 http://www.ies-usa.com 5. Connect the other end of the cat5 cable to the Ethernet port on the 330 Rx switch control. 6. Connect the DVI end of DVI to HDMI cable to the 330 Rx switch control. IES Interactive Training 1229 Oak Valley Drive Ann Arbor, MI 48108 1-800-344-1707 http://www.ies-usa.com...
Page 5
IES Interactive Training 1229 Oak Valley Drive Ann Arbor, MI 48108 1-800-344-1707 http://www.ies-usa.com 7. Connect the HDMI end of the DVI to HDMI cable to the HDMI 1IN port on the back of the projector. 8. Lastly, connect the power to supply to the power 12V 0.8 amp slot on the 330 Tx and insure the DDC ROUTE remote is switched to the ON position.
Page 6
Your Extron switch and control extension setup is complete. Train Test Thrive. IES Interactive Training 1229 Oak Valley Drive Ann Arbor, MI 48108 1-800-344-1707 http://www.ies-usa.com...
Need help?
Do you have a question about the Extron and is the answer not in the manual?
Questions and answers