Advertisement
Quick Links
Advertisement
Related Manuals for Memorex RF Optical Mouse
Summary of Contents for Memorex RF Optical Mouse
- Page 1 RF Optical Mouse...
- Page 2 Dear Memorex Consumer Congratulations! You just purchased the perfect Wireless Mouse! Please take some time to read the following instructions carefully. The Memorex RF ScrollPro Optical Mouse signal is transmitted through electromagnetic energy from transmitter to the receiver. The output power is low but strong enough to have a good detection for the receiver.
-
Page 3: Hardware Installation
Quick Installation Guide for the Memorex RF ScrollPro Optical Mouse: Hardware Installation 1. Open the battery compartment on the mouse and set the channel switch to either “1” or “2” 2. Insert the 2AAA batteries into the battery compartment and close the cover. -
Page 4: Software Installation
LED will flash slowly. The mouse is then ready for use. 3. The Memorex RF Optical Mouse comes equipped to conserve battery life. The mouse will enter “Sleep” mode after 90+ seconds of non-use. To “Wake” the mouse simply press any mouse button or move the scroll wheel. - Page 5 2) When the mouse is charging, the scroll wheel will illuminate red and blink quickly. Once the charge is near complete, the light will remain steady. 3) The Memorex RF Wireless Optical Mouse comes equipped to conserve battery life. The mouse will enter “Sleep” mode after 90+ seconds of...
- Page 6 To “Wake” the mouse, simply press any mouse button or move the scroll wheel. Technical Support: If the above suggestions did not answer your questions, please direct your inquiries to Memorex Technical Support at techsupport@memorex.com or call 310-891-1680 Monday- Friday 9am-5pm pacific time.