Throttle Deadband - JR Racing XS3PRO User Manual

Function Mode

Throttle Deadband

The throttle deadband feature is used to reduce/eliminate
the dead throttle area that exists at neutral to the starting
point of throttle and from neutral to the starting point of
braking. This area is sometime known as deadband. As
more throttle trim (also known as static brake) is applied,
more of the dead trigger area right off neutral exists. To
eliminate the throttle deadband, adjust a forward value such
that your vehicle's wheels just start to turn when the trigger
is slightly squeezed. This provides the most accurate feel
and eliminates the dead area in the throttle. To eliminate
the braking deadband, adjust the brake value such that
your vehicle starts to slow down when the trigger is slightly
pushed. This provides the most accurate brake feel and
eliminates the dead area when braking.
tdb
0 ∞
L/F
tdb
0 ∞
R/B
Values: 0% to 100%
Clear = 0%
Accessing the Throttle Deadband Function
Forward Adjustment
(depends on
trigger position)
Current Value
Brake Adjustment
(depends on
trigger position)
Current Value
1. Turn the transmitter power switch on.
2. Press the Scroll key to access Function mode.
3. Press the Scroll key until "TDB" appears on
the screen
4. Move the trigger accordingly to adjust the forward or
braking deadband.
5. Press the Increase or Decrease key to select the
desired value necessary to eliminate dead area.
6. Press the Scroll key to access the
Exponential function.
7. To exit the Function mode, either turn off the
transmitter power switch or press the Scroll and
Channel keys at the same time.
23