B&B Electronics Spectre RT3G-30xB1003 Quick Start Manual

Product Overview

SMA Antenna
connector
LEDs
3 V or 1.8 V
SIM card
readers
SMA Antenna
connector
The router will not work unless an antenna is attached,
power is applied, and an activated SIM card is inserted.
Powering the router with no antenna
attached can damage the router
1
Register your Jazz card
Use the following link:
https://prepaid.jazzwirelessdata.com/prepaid/#
If you have an existing account, please login and
proceed to Step 2.
If you do not have an existing, account please
click "Register" to create an account.
Power
Ethernet
and/or
Aux ports
Enter your personal information and create a
password. When entering your SIM card
number(s), use the 19 digit number located on the
USB Port
bottom left of the card.
Do not include the letter (F) at the end of the number.
I/O Port
Enter the activation code (key) 41295876. Then
press "Submit."
Now check your email, where you will have
received a link to complete activation. The link will
send you to the login screen. Log in and proceed to
Step 2.
Note: The "username" is the email address supplied
during registration.
Digi-Key Sample SIM Activation Portal
2
To add additional SIM(s), click "Register SIMs".
The link is located at the bottom right corner of
the table.
If you see red text, as shown in the screen
captures below, please wait for the SIM card to
fully register with JAZZ. You may need to
manually refresh the page.
SIM Registration page shows red text