Introduction ank you for purchasing the QUALIA INDIGO Series Preampli er. Please read this Owner's Manual thoroughly before using the product so CONTENTS that its high-quality audio can be enjoyed for years to come. 1. Introduction .....
Safety Precautions How to Use Audio Equipment Correctly Before using the product, please read the Safety Precautions and Owner's Manual thoroughly and use the product correctly. Keep this Owner's Manual at hand for future reference. Symbols The Safety Precautions and the product use various symbols to help users use the product safely and correctly and also prevent any hazard or damage to you, other people, or property.
INDIGO LINE Main Unit (1) Front Panel Input selector Volume control (2) Rear Panel Rch "C" Rch "A" Lch "B" Lch "RCA" Input Input Input Output Rch Power inlet Lch Power inlet Rch "RCA" Rch "B" Lch "A" Lch "C" (Fischer connector) (Fischer connector) Output...
INDIGO Pre Power Supply (1) Front Panel Power indicator (2) Rear Panel Rch Power outlet Lch Power outlet Power switch (Fischer connector) (Fischer connector) AC power inlet Voltage indication (15 AMP IEC type) (operate the Power Supply Fusebox only at the voltage indicated) (3) Power Cables Rch Power cable Lch Power cable...
Positioning and location of the units WARNING Install this equipment in a location with adequate space for ventilation and heat release. If this equipment is installed in a location where it will be exposed to direct sunlight, extremely high released smoothly. When installed on an unstable surface, this equipment cannot perform its functions adequately.
Page 7
Install the Power Supply separately from the Main Unit. Main Unit Power Supply Install the Power Supply separately from the Main Unit. heat release). Main Unit Power Supply...
Connection of Power Cable WARNING Note: Be sure to connect the power cable before connecting the AC power cord. Be sure to connect the cables as described below. does not come off easily. Be sure that cables are connected correctly. properly attached.
Connecting a cable with the power on may damage the Main Unit and the equipment to be connected, Before connecting equipment, thoroughly read the instruction manual for each device and turn off the Connecting/disconnecting while turning the plug may rotate the terminal on the Main Unit, causing Unbalanced RCA connection Audio equipment can be connected.
equipment to be connected with this device. If a cable needs to be customized so that it can be connected properly, please contact the dealer or cable manufacturer. If the polarity does not match, no sound is generated and the Main Unit and the connected equipment may be damaged.
CAUTION Connecting a cable with the power on may damage the Main Unit and the equipment to be connected, which may disconnecting while turning the plug may rotate the terminal on the Main Unit, causing disconnection. Be sure to "#$%&!'(& !#$%&!'(&...
CAUTION Connecting a cable with the power on may damage the Main Unit and the equipment to be connected, which may equipment to be connected with this equipment. If a cable needs to be customized so that it can be connected properly, please contact the dealer or cable manufacturer.
WARNING Connection of AC Power Cord AC POWER INLET Next, connect the plug of the power cord into the wall outlet. 89-:5;%1-#63%0 " " !"!#$%&'()*+,--.".%/0123&)*+,--4"415/67 ;233-5/03%0 $/0.12"$1.3&4)&4 "/0.12"$1.3&4)&4 ;233-5/03%0 " 9%:*-.(:;4/0 "%&'()*+,*-. "%&'()*+,*-. "/0 " <5;%1-8=:3#>#%1...
Basic Operation CAUTION damage the speakers. from the front panel) to turn ON the power. When the power is turned on, the indicator on the front panel of the Power Supply illuminates. 2#3(+4&356,- ;(646#4788 ;(646#479 01&!*-2$% " #-**&"./*$/ " 2#3(+4&356,- "#$%&'()*(+ "#$%&'()*(+ ",-...
Select a program source to be used using the input selector equipped on the front panel of the Main Unit. Input selector Volume control Input selector Volume control Before selecting another program source, be sure to lower the volume. Select an input to be power of the source used using the input equipment is on.
Page 17
power of this equipment. Turn off the power Turn off the Turn off the power power of the of the source equipment. Tips for enjoying higher quality sound CAUTION When the equipment is not going to be used for a long period of time due to travel or other similar reason, remove the power the plug.
WARNING Co. is not responsible for any failure of the Main Unit or bodily harm caused by replacement of the fuse replace the fuse with the power cord connected to the Main Unit or wall outlet because it will result in fuse.
Maintenance Before servicing or moving this device, be sure to turn off its Power switch, pull out the power plug from the wall socket, and To clean this equipment, wipe it with a soft cloth such as commercially available cleaning cloth. When the device is extremely dirty, gently remove dirt using a soft slightly dampened cloth.
Need help?
Do you have a question about the INDIGO series and is the answer not in the manual?
Questions and answers