Table of Contents
Advertisement
Setting up your TV
2 Press the a button
The LANGUAGE menu appears.
3 Press the 6 buttons to choose
ENGLISH
The on-screen display will then be in
English.
To receive SKY 1 you need a satellite
tuner. You must have the satellite tuner
set to SKY 1 before starting the AUTO
PROGRAM function which follows.
4 Press the a button to start the
AUTO PROGRAM function
The AUTO PROGRAM menu appears
and received TV channels are
automatically stored in the programme
numbers (PR).
• To cancel the AUTO PROGRAM
function:
Press the b button.
After the TV channels have been
registered in the programme
numbers (PR), the EDIT menu
appears
• If you want to, you can now edit the
programme numbers (PR) using the
EDIT/MANUAL function. For details,
see "EDIT/MANUAL" on page 28.
• If you do not want to edit programme
numbers (PR), go to the next step.
8
If "ACI START/ACI SKIP" appears
in the AUTO PROGRAM menu:
You can use the ACI (Automatic Channel
Installation) function to decode the ACI
data and complete the registration of all
the TV channels quickly. For details of
the ACI function and how to use it, see
"Using the ACI function" on page 32.
If you don't want to use the ACI function,
press the 6 buttons to choose ACI
SKIP and then press a.
5 Press the a button to display the
T-V LINK menu
6 If you do not have a T-V LINK
compatible VCR connected:
Press the b button to exit the T-V LINK
menu.
The T-V LINK menu disappears.
If you have a T-V LINK compatible
VCR connected to the EXT-2
terminal:
Follow the operating procedure "Using
the DECODER (EXT-2) function" on
page 33 to transmit the programme
number (PR) data.
Now, the initial settings are complete,
and you can watch the TV
• BBC1, BBC2, ITV, Channel 4 and
Channel 5 are automatically set to the
programme numbers PR1 to PR5. If the
TV doesn't receive one of these TV
channels, that programme number (PR)
will not be set. Programme number PR6 is
not normally set.
Advertisement
Table of Contents
