Sound Menu; Stereo / I • Ii; Bass; Treble - JVC InteriArt 0204-T-CR-JMUK Instructions Manual

SOUND menu

SOUND
STEREO/

BASS

TREBLE

BALANCE

SURROUND MODE

TV SPEAKER

TV OK
D0019-EK
STEREO / I • II
When you are viewing a bilingual broadcast
programme, you can choose the sound from
Bilingual I (Sub I) or Bilingual II (Sub II). If
you have poor reception on a stereo
broadcast, you can change from stereo to
mono sound so that you can hear the
broadcast more clearly and easily.
s: Stereo sound
v : mono sound
t : Bilingual I (sub I)
u : Bilingual II (sub II)
• The sound mode you can choose differs
depending on the TV programme.
• This function does not work in the EXT
modes.
BASS
You can adjust the low tone of the sound.
2 : weaker
3 : strong
TREBLE
You can adjust the high tone of the sound.
2 : weaker
3 : strong
BALANCE
You can adjust the volume balance between
the left and right speaker.
2 : turn the left speaker's volume level up.
3 : turn the right speaker's volume level up.
26
SURROUND MODE
L/C/R
TV SPEAKER
Choose and set the surround mode.
1 Choose the SURROUND MODE,
and then press the a or 3 button
The SURROUND MODE menu appears.
SURROUND MODE
DOLBY PRO LOGIC MUSIC
DOLBY PRO LOGIC MOVIE
DOLBY VIRTUAL
SURROUND OFF
DOLBY PRO LOGIC MUSIC
TV OK
D0111-EK
2 Press the 6 buttons and choose
the surround mode
• For details of the surround mode, see
"Surround function (Dolby Pro Logic
II)" on page 16.
• When the DOLBY PRO LOGIC II
MUSIC or DOLBY PRO LOGIC II
MOVIE is chosen, the surround
settings can be set (see "Surround
settings (Dolby Pro Logic II)" on
page 17).
The settings for the TV SPEAKER set when
DOLBY PRO LOGIC II MUSIC or DOLBY
PRO LOGIC II MOVIE is chosen are
displayed.
The TV SPEAKER settings cannot be
changed here.