Return; Input - JVC I'Art 1204JGI-II-IM User Manual

Button Functions

Return +

The R + button has two functions:
ETURN
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the channels
using the CH+ and CH– buttons.
R + and hold for three seconds
ETURN
The channel currently active has been programmed as your return+ channel. Now scan through
R +
ETURN
• To cancel your Return+ channel, press and hold the R
message "RETURN CHANNEL CANCELLED!" will appear.
• Return+ works only with the CH+/– buttons. Pressing any number key will cancel Return+.

Input

Selects the signal input source for the television: TV (for Antenna or Cable) or Video-1, 2, or
V2-Component or Video-3 for video devices like VCR's, DVD players, or camcorders.
Press the I
TV
Note:
• You can also access the input menu screen by using the M
instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST
screen. Choose the INPUT by pressing M
INPUT by using the C
42
RETURN CHANNEL
PROGRAMMED!
the channels using the C
You will return to your programmed channel.
button
NPUT
VIDEO-1 VIDEO-2
+/- buttons (
HANNEL
+/– buttons.
HANNEL
+ button for three seconds. The
ETURN
V2-COMPONENT
ENU
† on the front panel and select TV or VIDEO
ENU
√ ®
OPERATE ).
VIDEO-3
button on the front of the TV