Page 1
USER INSTRUCTIONS FOR PORTABLE DEHUMIDIFIERS 16 LITRE - MODEL NO. DHMD163 20 LITRE - MODEL NO. DHMD203 THANK YOU FOR CHOOSING YOUR NEW DEHUMIDIFIER. BEFORE USING THE UNIT READ THESE INSTRUCTIONS FULLY AND RETAIN THEM FOR FUTURE REFERENCE...
THESE DEHUMIDIFIERS ARE INTENDED FOR DOMESTIC USE ONLY. SAFETY NOTES 1. Do not connect to any AC socket outlet that is damaged *. 2. Do not use with extension leads and multi-way adapters. 3. Ensure hands are not wet when inserting the plug into the power socket. 4.
IDENTIFICATION OF PARTS CONTROL PANEL Tank Full Ambient Ambient LED Display Humidity Level Indicator Temperature Humidity Setting Buttons Power Button Timer Button Fan Speed Set Humidity Fan Speed Indicator Level indicator Button LCD DISPLAY Relative Humidity of the surrounding air in the room Temperature of the surrounding air in the room Timer setting in hours (01 to 12) This symbol shows when machine is defrosting...
BUTTON FUNCTIONS POWER BUTTON Used for switching the unit from “Standby” to “On” and from “On” to “Standby”. TIMER BUTTON With the machine on “Standby”, this can be used to set the time until the machine switches “On”. With the machine “On”, this can be used to set the time until the machines switches back onto “Standby”. HUMIDITY LEVEL SET BUTTON Up (▲) and Down (▼) buttons used to set the required humidity level as shown by the Set Humidity Level Indicator.
Page 5
8. The moisture extracted from the surrounding air, is collected in the water tank at the front of the unit. The rate at which the water is collected in the tank is dependant on a number of factors, such as the room temperature, the size of the room and the source of the humidity.
Page 6
PRECAUTIONS Do not pull on the mains lead when removing the Do not use sprays cans containing insect repellent, plug from the power socket. paint or oil near the machine as it could damage the plastic parts or cause a fire Do not place the machine on an uneven floor as it Keep the unit at least 20cm from a wall to dissipate could cause noise, vibration and spillage of water...
MAINTENANCE IMPORTANT Make sure the machine is un-plugged from the power socket before carrying out any cleaning or servicing. CLEANING THE CABINET 1. Wipe the cabinet of the unit with a soft, clean and dry cloth. 2. If the cabinet is very dirty, use a mild detergent applied with a damp cloth. Wipe off the detergent with a clean damp cloth.
Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. GET Plc., Key Point, 3 – 17, High Street, Potters Bar, Herts. EN6 5AJ Helpline Telephone No. 0121 565 7770 AR1131 Ed.B...