Advertisement
CONNECTING TO THE AC POWER SUPPLY
Do not connect your home terminal (or any other equipment such as a TV or VCR) to the AC
power supply until you have properly connected all the other cables.
Do not defeat the safety purpose of the polarized plugs on power cords. A polarized plug has two
blades with one wider than the other. This plug fits into the outlet in only one way; match the wide
blade of the plug to the wide slot of the outlet.
Disconnect your home terminal from the AC power supply before you disconnect any other
equipment from its rear panel.
The only way to disconnect your home terminal from the AC power supply is to remove the AC
power cord (or switch the wall socket-outlet switch, if present, to its OFF position). Your home
terminal must therefore be installed near to the AC power socket-outlet, which should be easily
accessible.
Connecting your TV to the AC power supply
If your TV has a rating of less than 500 W, connect the power cord from your TV into the
connector labeled "POWER OUTLET" on the rear panel of your home terminal. This saves a
wall outlet (although, if your TV is rated 500 W or more, you must connect it to a wall outlet).
Connecting the power cord to your home terminal
Before you connect your home terminal to a wall outlet, connect the polarized socket on the
power cord into the plug labeled "POWER INPUT" on your home terminal's rear panel.
Connecting equipment to the AC wall outlets
Connect the polarized plugs on the power cords from your home terminal, VCR and any
other equipment into AC wall outlets. If these outlets have switches, switch them to ON.
10
WARNINGS
Advertisement
