Advertisement
plug point. Do not place the extension cord in a position where it can be pulled on
by children or animals or tripped over.
16. This heater is not suitable for outdoor use. Do not use this heater for anything
other than its intended use.
17. DO NOT carry the heater by the power cord.
18. Do not leave this heater unattended during use. Always unplug the unit when not
in use or before cleaning.
19. Ensure that the switch is in the "Off" position after each use.
20. The manufacturer does not accept responsibility for any damage or injury caused
by improper or incorrect use, or for repairs carried out by unauthorised
personnel.
21. In case of technical problems, switch off the heater and do not attempt to repair it
yourself. Return the heater to an authorised service facility for examination,
adjustment or repair. Always insist on the use of original spare parts. Failure to
comply with the above mentioned pre-cautions and instructions, could affect the
safe operation of this heater.
22. DO NOT COVER THE HEATER WHEN IN USE.
OPERATING INSTRUCTIONS
Place the heater on a stable floor surface.
Plug the heater into the wall socket and switch on the wall socket.
Select the setting you require:
Press the Fan button and Heat I - 1000W for low heat
Press the Fan button, HEAT I and Heat II – 2000W for high heat
Turn on the Oscillation switch and it moves around 90° for widespread
heat
Turn the thermostat switch to set the temperature that you require.
When you have finished using the heater press the fan button and either Heat I or
Heat II setting. Switch off the wall socket and unplug the heater from the wall socket.
CLEANING AND MAINTENANCE
This heater is for household use only.
4
Advertisement
