On/Off Timer; Troubleshooting Guide - JVC C-T1421 User Manual

ON/OFF TIMER

ON TIMER SETTING
This feature allows you to have the TV automatically turn "ON" at predetermined time.
If you program the "ON" timer once the timer will turn "ON" the TV daily at the same time and to the same channel.
If the power has been turned on at programmed time, the channel is changed to a programmed one.
1 Press the MENU button.
2 Press the SET + or – button until
M E N U
the indicator next to "ON/OFF
CLOCK SET
ON/OFF TIMER
TIMER" begins to flash, then
CH SET UP
PICTURE
press the ENTER button.
LANGUAGE / IDIOMA
COLOR AUTO
+ / — / ENTER / MENU
3
Press the SET + or – button until
ON/OFF TIMER
the indicator next to "ON TIMER"
ON TIMER
0:00 CH012
begins to flash, then press the
ENTER button.
OFF TIMER
0:00
+ / — / ENTER / RESET / MENU
4
Press the SET + or – button to set
ON/OFF TIMER
the hour, then press the ENTER ON TIMER
0:00 CH012
button. If you want to change the
hour, press the RESET button.
OFF TIMER
0:00
+ / — / ENTER / RESET / MENU
NOTES:
• You cannot set the ON/OFF TIMER when the clock is not set.
• This TV will automatically turn off approximately 1 hour later after the ON TIMER turns on the TV unless any
buttons are pressed.
• To cancel the ON TIMER function:
To cancel ON TIMER in step 7 above press the SET + or – button to select the CANCEL mode.
OFF TIMER SETTING
This feature allows you to have the TV turn "OFF" automatically at a predetermined time.
If you program the OFF TIMER once, The TV will be automatically turned off at the same time daily.
1
Press the MENU button.
2
Press the SET + or – button until
M E N U
the indicator next to "ON/OFF
CLOCK SET
ON/OFF TIMER
TIMER" begins to flash, then
CH SET UP
PICTURE
press the ENTER button.
LANGUAGE / IDIOMA
COLOR AUTO
+ / — / ENTER / MENU
3
Press the SET + or – button
ON/OFF TIMER
until the indicator next to "OFF ON TIMER
7:30 CH012
TIMER" begins to flash, then
press the ENTER button.
OFF TIMER
0:00
+ / — / ENTER / RESET / MENU
NOTES:
• If station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.
• To cancel the OFF TIMER function:
To cancel OFF TIMER, in step 7 above press the SET + or – button to select the CANCEL mode.
14
5
Press the SET + or – button
ON/OFF TIMER
to set the minute, then press
ON TIMER
7:00
the ENTER button.
• You can change in 10-
OFF TIMER
0:00
minutes step by holding
down the SET + or – + / — / ENTER / RESET / MENU
button.
6
Press the SET + or –
ON/OFF TIMER
button to set the channel,
ON TIMER
CANCEL
7:30
then press the ENTER
button.
CANCEL OFF TIMER
0:00
• You can set the channel
which is added in the
+ / — / ENTER / RESET / MENU
CH SET UP option.
7
Press the SET + or –
CANCEL
ON/OFF TIMER
button to select the
ON TIMER
CANCEL 7:30
SET mode.
OFF TIMER
0:00
+ / — / ENTER / RESET / MENU
8
Press the MENU button.
4
Press the SET + or –
ON/OFF TIMER
button to set the hour,
ON TIMER
7:30
then press the
ENTER button.
OFF TIMER
0:00
If you want to change the
hour, press the RESET
+ / — / ENTER / RESET / MENU
button.
5
Press the SET + or – ON/OFF TIMER
ON TIMER
button to set the minute
7:30
then press the ENTER
OFF TIMER
button.
CANCEL
11:00
• You can change in 10-
+ / — / ENTER / RESET / MENU
CANCEL
minutes step by holding
down the SET + or – button.
ON/OFF TIMER
6
Press the SET + or – ON TIMER
7:30
button to select the SET
mode.
OFF TIMER
11:30
7 + / — / ENTER / RESET / MENU
Press the MENU button.

TROUBLESHOOTING GUIDE

Before requesting service, please refer to the following chart for the symptom and possible solution.
SYMPTOMS
TV does not operate
CH012
CANCEL
Poor sound or No sound
CANCEL
Poor picture or No picture
CH012
CANCEL
Poor reception on some channels
CANCEL
Poor color or no color
CH007
CANCEL
CANCEL
Picture wobbles or drifts
No CATV reception
Horizontal or diagonal bars on screen
No reception above channel 13
No Remote operation
CH012
CANCEL
CANCEL
TV shuts off
CH012
CANCEL
CANCEL
Closed - Caption is not activated.
Display is not shown in your language.
CH012
CANCEL
CANCEL
POSSIBLE SOLUTIONS
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.
• Station or CATV experiencing problems, tune to another station.
• Check sound adjustments (Volume and Muting).
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Check antenna or CATV connections, reorient antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Station signal is weak, reorient antenna to receive desired station.
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or CATV connections, reorient antenna.
• Check for sources of possible interference.
• Check the color system.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• CATV company is scrambling signal.
• Check antenna orientation.
• Check all CATV connections.
• Set TV/CATV menu option to the CATV mode.
• Station or CATV system problems, try another station.
• Check antenna connections, reorient antenna.
• Check for sources of possible interference.
• Make sure TV/CATV menu option is in the appropriate mode.
• If using antenna, check UHF antenna connections.
• Batteries are weak, dead or inserted incorrectly.
• Remote is out of range, move closer to TV within (15 feet).
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions between the Remote and the TV.
• Make sure the power cord is plugged in.
• No broadcast on station tuned.
• Sleep Timer is set.
• ON/OFF TIMER is set.
• Power interrupted.
• Approximately 1 hour has passed after the ON TIMER turns on and no button was
pressed (See page 14).
• TV station experiencing problems or program tuned is not closed captioned.
Try another channel.
• Check CATV connection or VHF/UHF antenna, reposition or rotate antenna.
• Press TV/CAP/TEXT button to turn on the closed caption decoder.
• Select proper language in the menu options.
15