Cleaning And Care - Nesco NC5566 RAISU Instruction Manual

Operating Instruction
Rice Cooker Operation
1. Measure and wash the rice. Transfer it to the cooker vessel. Do not use the
cooking vessel to wash the rice as damage may occur to the surface.
2. After transferring the rice to the cooking vessel add the water. For each
measure of rice use 1.5 measure of water.
3. Turn the cooking vessel back and forth to make certain it has good contact
with the heating element.
4. Place the lid on the rice cooker.
5. Insert the plug into the rice cooker and then plug it into the wall socket.
6. Press the electronic switch to "COOK" The indicator lamp for the function
chosen will then illuminate.
7. Once the cooking is completed for either function the "WARM" feature will
engage.

Cleaning and care

This appliance should be cleaned after every use
1. Unplug the automatic rice cooker from the outlet when not in use or before
cleaning. Never immerse Heating Body in water or any other liquid! Allow the
automatic rice cooker to cool completely before cleaning.
2. Do not use abrasive cleaners or scouring pads or steel wool to clean the
automatic rice cooker.
3. Heating Body : Lightly wipe the exterior with a damp cloth or sponge. Do not
immerse heating body into soft cloth.
4. Inner Pot : fill with hot water and let it sit for a while and then wash in hot soapy
water with a soft cloth.
5. Keep the outer lid detachable inner lid dry and clean when not used.
6. Heating Plate, Thermostat : Grains of rice or other foreign matters may stick to
the heating plate. These must be removed to prevent inadequate cooking. To
remove cooked rice, smooth sand paper can be used. Smooth out and polish
the spot for good contact between the heating plate and the bottom of the
inner pot.
This appliance is for household use only!
Save this instruction.
8