Power Supply - MSI K9A2 Platinum V2 Series User Manual

M S-7376 M ainboard

Power Supply

ATX 24-Pin Power Connector: ATX1
This connector allows you to connect an ATX 24-pin power supply.
To connect the ATX 24-pin power supply, make sure the plug of the
power supply is inserted in the proper orientation and the pins are
aligned. Then push down the power supply firmly into the connector.
You may use the 20-pin ATX power supply as you like. If you'd like
to use the 20-pin ATX power supply, please plug your power sup-
ply along with pin 1 & pin 13 (refer to the image at the right hand).
There is also a foolproof design on pin 11, 12, 23 & 24 to avoid
wrong installation.
12
ATX1
1
ATX Power Connector: JPW1/ JPWR1
This 12V power connector JPW 1 is used to provide power to the CPU. This power
connector JPWR1 is used to provide power to stable the operation of graphics card.
JPW1 Pin Definition
JPW1
2
4
3 1
Important
1. Maker sure that all the connectors are connected to proper ATX power sup-
plies to ensure stable operation of the mainboard.
2. Power supply of 450 watts (and above) is highly recommended for system
stability.
2-8
Pin Definition
PIN SIGNAL
24
1 +3.3V
2 +3.3V
3 GND
4 +5V
5 GND
6 +5V
7 GND
8 PWR OK
9 5VSB
10 +12V
11 +12V
13
12 +3.3V
PIN SIGNAL
1 GND
2 GND
3 12V
4 12V
PIN SIGNAL
13 +3.3V
14 -12V
15 GND
16 PS-ON#
17 GND
18 GND
19 GND
20 Res
21 +5V
22 +5V
23 +5V
24 GND
JPWR1 Pin Definition
JPWR1
1
PIN
1
2
3
4
pin 13
pin 12
SIGNAL
NC
GND
GND
12V