Table of Contents
Advertisement
Installing Intelligent Device Platform Tools on the Host System
For temporary activation, select Temporary activation. A License Activation
•
Code will be required later. Use the license obtained in
10. On the Host Information page, select the Ethernet adapter that will be used
11. On the User Information screen, do the following:
12. On the Choose Installation Filters screen, select only Intel.
13. On the Select Products screen, keep the default selections.
14. When the License Agreement window pops up, click I ACCEPT to accept
15. On the Confirm and Install page, click Install.
Note: The download and install can take several hours depending on the speed of your
Internet connection.
16. Successful installation will end with a message that says:
17. If you encounter installation issues, provide the files
October 2014
Document Number: 330496-005
to download the Host tools from the internet.
For Loaner kits, use the LAC and the 90-day Wind River Host Tools
•
License provided in the Dear Customer Letter included with your
Development Kit.
If you selected Temporary activation, enter the temporary License
•
Authentication Code provided in the Dear Customer Letter.
Enter the required user information.
•
the standard license agreement and the product evaluation license
agreement for Wind River Linux and Intelligent Device Platform.
Installation Completed
/
$HOME/WindRiver
setup.log
your Intel support contact.
Intel
. Click Finish to exit the Installer window.
and
setup_install_failure.log
§
®
Gateway Solutions for the IoT – Development Kit – DK50
Section
4.3.2.
Media
to
Getting Started Guide
29
Advertisement
Table of Contents
