The camcorder warranty is 90 days parts & labor. Connecting the CamoCam II™ Connecting the CamoCam II™ Continued The warranty does not cover abuse, acts of God, or damage of any kind resulting from improper care. Contact LJ&L Products prior to Connecting the CamoCam II™...
PAGE 17 Troubleshooting Connecting the CamoCam II™ Connecting the CamoCam II is easy; just follow these steps: I’ve got this thing hooked up and it doesn’t work….now what? Here is a list of _________________________________________________________________ Frequently Asked Questions (FAQ’s) that might help:...
CamoCam™ Help Line 1-318-894-9490 Remote Video Surveillance PAGE 5 PAGE 16 Infrared Illuminator Connecting— Continued 3. Connect the system receiver cable, external camera cable, remote illumi- nator transmitter cable and auxiliary transmitter cable (Setup Buzzer) to the top of the case. You may not have the Remote illuminator with your unit;...
CamoCam™ Help Line 1-318-894-9490 Remote Video Surveillance PAGE 6 PAGE 15 PAGE 15 Connecting— Magnetometer Continued Now all that you need to do is press the setup button on the control panel, and then turn on the monitor. Pressing the setup button allows you to aim the camera, us- ing the monitor, for ten minutes before it will begin the program for which it is...
CamoCam™ Help Line 1-318-894-9490 Remote Video Surveillance PAGE 14 PAGE 7 Seismic Sensor Using the Camera 1. Figure (h) represents the wireless “keyfob” that allows you to test your unit’s sending and receiving capability. Once pressed, the key- fob LED flashes, letting you know it’s sending multiple signals to the receiver.
CamoCam™ Help Line 1-318-894-9490 Remote Video Surveillance PAGE 8 PAGE 13 External Camera Using the Camera— Continued 4. The camera has 9 pre-programmed settings allowing quick setup for most ap- plications without the aid of a computer. To select one of these settings, have the system power in the “ON”...
CamoCam™ Help Line 1-318-894-9490 Remote Video Surveillance PAGE 12 PAGE 9 Setup Buzzer Tips & Tricks Here are a few things to remember that will make setting up your camera a more enjoyable experience: Make sure all batteries are fully charged before using the system. Use a checklist to ensure all cables are with the camera before going into the field.
PAGE 11 CamoCam™ Help Line 1-318-894-9490 Remote Video Surveillance PAGE 11 PAGE 10 Passive Infrared (PIR) Sensor Tips & Tricks— Continued Be sure the small photocell inside the case is exposed to daylight through the lens opening on the side of the case. It is easy to accidentally push the pho- tocell down into the foam when inserting the camcorder back into the case.