Unmodified plugs and matching out- not avoided, could result in lets will reduce risk of electric shock. minor or moderate injury. SKU 67537 For technical questions, please call 1-800-444-3353. Page 2...
Page 3
Safety equipment sories, or storing the power tool. such as NIOSH-approved dust mask/ Such preventive safety measures respirator, NIOSH-approved hear- SKU 67537 For technical questions, please call 1-800-444-3353. Page 3...
In addition, people with pacemakers should: • Avoid operating alone. • Do not use with power switch locked • Properly maintain and inspect to avoid electrical shock. SKU 67537 For technical questions, please call 1-800-444-3353. Page 4...
Include vibration-free periods each ditions and situations that may occur. day of work. It must be understood by the operator that common sense and caution are factors which cannot be built into this SKU 67537 For technical questions, please call 1-800-444-3353. Page 5...
Using exten- sion cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and pos- sible tool damage. (See Table a, next page.) SKU 67537 For technical questions, please call 1-800-444-3353. Page 6...
2.1 – 3.4 3.5 – 5.0 5.1 – 7.0 7.1 – 12.0 * based on limiting the line Table a voltage drop to five volts at 150% of the rated amperes. SKU 67537 For technical questions, please call 1-800-444-3353. Page 7...
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible. SKU 67537 For technical questions, please call 1-800-444-3353. Page 8...
Pad to the tool, then align a Sheet of extra length to allow free movement Sand paper over the pad and press while working. into place. SKU 67537 For technical questions, please call 1-800-444-3353. Page 9...
Speed Dial (39). There are six speed divisions from 1 (slowest) to 6 (fast- est). Do not allow contact between the Ac- cessory and workpiece until the tool is running at the intended speed. SKU 67537 For technical questions, please call 1-800-444-3353. Page 10...
Replace the Sanding Paper when it becomes worn or contains excessive debris build-up. Have the Scraper and Blades sharp- ened when they become dull. Have a qualified technician inspect the tool when it malfunctions. The SKU 67537 For technical questions, please call 1-800-444-3353. Page 11...
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 67537 For technical questions, please call 1-800-444-3353. Page 13...
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 SKU 67537 For technical questions, please call 1-800-444-3353. Page 14...
Need help?
Do you have a question about the 67537 and is the answer not in the manual?
Questions and answers