Advertisement
Quick Setup Instructions, continued
4
Connect A/V Devices.
5
Connect the Display power cord to a
AC wall outlet, then connect the Media
Center power cord to a AC wall outlet.
6
Press the Power button on the Remote
Control.
Alternatives: press the Power button on the top of the
Display or on the front of the Media Center.
For complete instructions about connecting A/V
devices, see Chapter 2 in the Owner's Guide.
DVD Player as A/V source:
Connect the 3 Component
(YPbPr) video cables and L/R
audio cables to COMP 1 on the
media center.
Audio from Media Center to
A/V Receiver:
Connect the L/R audio IN on
A/V Receiver to AUDIO LINE
OUT on the media center.
Optional: For best sound
quality from digital channels and
devices, connect A/V Receiver
digital audio IN to media center
DIGITAL AUDIO OUTPUT.
A/V from Media Center to
VCR for Recording: Connect
Composite Video and L/R IN on
VCR to MONITOR OUTPUT on
the media center.
IMPORTANT: Wait until the blue light on the front of
the media center stops blinking (about 1 minute)
before pressing the Power button on the remote
control.
Advertisement
