Summary of Contents for USAlert Alert Monitor Receiver
- Page 1 WatchDog LT Alert Monitor Receiver USER GUIDE This users guide has been developed for the WatchDog LT paging alerting receiver.
- Page 2 In addition to public safety systems the WatchDog LT pager can be used in any radio system that requires tone alerting and channel monitoring. The all new WatchDog LT pager offers many new and exciting features over other previous generation voice pagers.
- Page 3 All messages will be removed from memory. Voice Memory Playback in Detail WatchDog LT models can dynamically record up to 4 minutes of messages. Messages can be played back using the right button to initiate play back and then using the left and center buttons to select which message to replay.
- Page 4 Revert with N Time Delay - Adding the N time delay to revert operation causes the WatchDog pager to disregard the state of the carrier during the N time. The N time begins immediately after the alerting cycle and ends on N timeout. At this time the...
- Page 5 Auto Reset with N Time Delay - Adding the N time delay to revert operation causes the WatchDog pager to disregard the state of the carrier during the N time. The N time begins immediately after the alerting cycle and ends on N timeout. At this time the WatchDog will enter normal auto reset operation.
- Page 6 Tone Alerting - If tone alert is selected the WatchDog LT pager will emit an audible tone alert immediately following proper address detection. The alert duration is generally controlled by the length of a transmitted address tone.
- Page 7 N time the pager will resume watching the carrier to signal when to stop recording. WATCHDOG CHARGER The WatchDog series charger is both a smart charger and a rapid charger. It will charger both the WatchDog pager and a spare set of NiMH batteries simultaneously or individually.
Need help?
Do you have a question about the Alert Monitor Receiver and is the answer not in the manual?
Questions and answers