Do you have a question about the C-150 and is the answer not in the manual?
Questions and answers
Summary of Contents for CPAP C-150
Page 1
SUPER CPAP POWER PACK USER’S GUIDE MODELS: C-150, C-222, C-444...
Page 2
YOUR CPAP MACHINE DOESN’T HAVE TO KEEP YOU FROM ENJOYING THE GREAT OUTDOORS... Super CPAP Power Packs, the most powerful external power solutions in the world, give CPAP users the freedom to experience new adventures on the road! START YOUR NEW ADVENTURE TODAY!
THE POWER METER POWER PACK OPERATION LOCATING THE CORRECT UNIVERSAL CONNECTOR OPERATION - POWER PACK WITH INVERTER SINE WAVE INVERTER OPERATION CHARGING THE POWER PACK VIA THE CIGARETTE LIGHTER SOCKET OF A VEHICLE 9-10 CPAP POWER PACK IMPORTANT NOTES 10-11...
Perfect for camping! With the addition of the 150 or 225 Watt Sine Wave Inverter (sold separately) you can safely recharge your CPAP Power Pack via the cigarette lighter socket of a vehicle giving you even more time to enjoy your outdoor adventures.
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. PACKING LIST CPAP POWER PACK CARRYING CASE C-150 or C-222 C-444 AC CHARGER DC POWER CORD CONNECTORS - 3 -...
CONTROL BOARD PART IDENTIFICATION A. DC IN/OUT JACK (A) B. DC IN/OUT JACK (B) C. TEST BUTTON D. LOW POWER ALARM E. POWER METER CHARGING THE POWER PACK CHARGING THE POWER PACK A VIA WALL OUTLET Connect the DC-out plug of the AC charger to the DC IN/OUT jack (A) of the Power Pack.
POWER METER THE POWER METER MAY BE ACTIVATED AFTER THE FIRST CPAP POWER PACK CHARGING. Press the TEST button, the number of the LED lights will show you the power level of the Power Pack.
Connect the DC Power Cord to the DC in/out jack located on the CPAP machine. If the DC Power Cord will not directly fit in the CPAP machine you will need to use one of the Universal Connectors provided to complete the connection between the Power Pack and the CPAP machine.
LOCATING THE CORRECT UNIVERSAL CONNECTOR Locate the DC input port on the CPAP machine. Try to insert a connector tip to the DC input port on the CPAP machine and then gently try to plug the connector tip to the DC Power Cord.
CONNECTING THE POWER PACK TO A CPAP MACHINE THAT DOES NOT HAVE A DC IN/OUT JACK If your CPAP machine does not have a DC in/out jack, you will need to use the 150 Watt or 225 Watt Sine Wave Inverter (sold separately) in addition to the Power Pack.
Push and hold the TEST button on the Power Pack for 30 seconds. Four green lights should illuminate on the front of the Power Pack. Push the ON/OFF button on your CPAP machine. Your CPAP machine should start functioning. CHARGING THE POWER PACK VIA THE...
When in doubt, please contact the manufacturer of your CPAP device. CPAP Power Packs are compatible with most makes and models of CPAP machines; however, some CPAP machines require the additional use of the 150 or 225 Watt Sine Wave Power Inverter to complete the connection between the Power Pack and the CPAP machine.
Page 14
SUPER CPAP POWER PACK IMPORTANT NOTES If you are unsure if the Super CPAP Power Pack will work with your machine, please call your machine’s manufacturer. A list of the most popular manufacturers’ contact information follows: DeVilbiss: 1-800-338-1988 www.devilbisshealthcare.com Fisher & Paykel: 1-800-707-5454 www.fphcare.com...
Need help?
Do you have a question about the C-150 and is the answer not in the manual?
Questions and answers