Operating Instructions - Salton SFP600 Instructions Manual

OPERATING INSTRUCTIONS

A. MIXING FUNCTIONS:
1. Chopping function:

Place the protection cover onto the blender switch connector.

Place the mixing bowl on the bowl axis and turn clock-wise to lock it in place.

Place the blade support on the axis in the middle of the bowl and press downwards
until it locks into place. Place the chopping blade onto the blade support, holding the
plastic section of the blade.

Place food into the bowl. Ensure that the pieces of food are not too large, and cut
pieces of food that are too large. The ideal size is 2cm x 2cm x 2cm.

Place the bowl cover onto the unit and turn in a clock-wise direction until the cover
locks into place.

Use the speed control on the front of the unit to chop the food to the desired size.
Once chopped, ensure that the speed control is on "0" before opening the bowl cover.
2. WHISKING FUNCTION:

Follow the same procedure as for the chopping function, using the whisking blade
instead of the chopping blade.
3. SLICING AND SHREDDING FUNCTION:

Place the mixing bowl on the power unit and turn clock-wise to lock it in place.

Slide the slicing or shredding knife into the knife support. Place the knife support into
the mixing bowl, onto the axis of the mixing bowl

Place the bowl cover onto the unit and turn in a clock-wise direction until the cover
locks into place.

Turn the speed control to the desired speed, and insert food into the chute at the top
of the bowl cover. Insert the measuring cup into the chute and slowly press
downwards to push the food through the blade.

Once the food has been sliced or shredded, turn the speed control to "0" before
opening the bowl cover.