How to connect and user guide for Magic Sing ET-23KH model.
1. Plug the power adaptor into the wall socket and the connection on the other end plugs into
the base unit at the back.
Power cable
→ Base Unit
(rear)
2. This unit allows you to use HDMI (HD-TV) or standard RCA (RED, WHITE and YELLOW)
connections depending on the television which you are using.
3. Decide which connection you need to use and before doing anything, make sure the unit is
SWITCHED OFF. Carefully take off the top piece of plastic on the base unit revealing chip
slots and a small switch. If you are using RCA, make sure the little black switch is toward "TV"
and if you are using HDMI connections, flick it over to "HD-TV".
Gently Slide
Back the Cover
4. If you are using standard RCA connections to your television, move onto step 5.
If you wish to connect your unit to your amplifier or home theatre system, skip
to step 6.
© 2014 Karaoke Home Entertainment All Rights Reserved
www.khe.com.au
/
www.khe.co.nz
www.how-to-convert-cdg.com
Please follow all steps before calling for addition help.
CONNECTION STEPS
If you are going to use your HD connection to your
television, skip to step 7.
/
www.picknmix.com.au
/
www.magicsingdownloads.com
– Document Revision 1.0
/
www.mp3g.com.au
/
www.magicsing.com.au