Audio Connections - Wired 4DVD User Manual

To connect your monitor, follow these steps:
1)
Attach the larger end of the pass-thru cable to the monitor port of your Mac or
video card.
2)
Attach the other end of the pass-thru cable to the video input connector at the
back of the Wired 4DVD card.
Connect the pass-
thru cable to the
MacÕs monitor port
and then to the
Wired 4DVD card.
Connect the cable
from your computer
monitor to the
4DVD card.
3)
Connect the cable from your monitor to the monitor output of the card.

Audio Connections

In addition to being able to play its sound directly through the MacÕs built-in
speaker (and thereby any attached sound system) the Wired 4DVD features two
separate audio outputs for specialized configurations:
¥ The Stereo mini-jack output
¥ The S/PDIF digital audio connector.
The stereo mini-jack outputs a standard analog stereo signal that can be used
by virtually any stereo receivers or amplified speakers. It also contains the Pro
Logic Surround Sound encoding that allows you to achieve surround sound by
attaching this signal to a Pro Logic receiver.
The S/PDIF connector is used to send digital audio signals directly to an
external sound system which features a Dolby Digital and/or DTS decoding
system.
12 Technology Overview