Table of Contents
Advertisement
Quick Links
How to Use Your
ETR or MLS
with
555-670-151
COMCODE 108370362
Issue 1
April 1999
To order additional
ETR or MLS tray cards,
please call 800-457-1235
and reference document
number 555-670-151.
Copyright 1999
Lucent Technologies
All Rights Reserved
MERLIN LEGEND
Phone
®
Understanding
Your Phone
Basic Phone
Functions
Using Features
(reverse side)
Feature & Programming
Codes
(reverse side)
Advertisement
Table of Contents
Summary of Contents for Lucent Technologies MLS
- Page 1 555-670-151 Basic Phone COMCODE 108370362 Issue 1 Functions April 1999 Using Features To order additional (reverse side) ETR or MLS tray cards, Feature & Programming please call 800-457-1235 and reference document Codes (reverse side) number 555-670-151. Copyright 1999 Lucent Technologies...
-
Page 2: Understanding Your Phone
Understanding Your Phone LINE All Telephones NNN-XXXX BUTTONS Make/receive outside calls only. Telephones with ICOM Buttons ICOM Ring Make/receive inside ringing calls and receive inside voice-announced calls. ICOM Voice Make inside voice-announced calls and receive inside ringing and voice- announced calls. ICOM Originate Only Make (not receive) inside calls only. - Page 3 Understanding Your Phone LINE Telephones with System Access BUTTONS (SA) Buttons continued Shared SA SSA Make/answer calls for co-workers or join conversations. Line is shared with another co-worker(s). One person has an SA button that is shared with one or more others who have SSA buttons corresponding to it.
- Page 4 Understanding Your Phone TONES Dial tone (steady) You can make a call. Busy (slow repeating tone) The phone you are calling is busy. Fast busy (fast repeating tone) No lines are available. Error (alternating high-low tones) You dialed or used a feature incorrectly. Confirmation (double break in dial tone followed by steady tone) You used a feature correctly.
-
Page 5: Make A Call
Basic Phone Functions MAKE If you are using a headset, you must A CALL lift the handset to make or answer a call and replace the handset to hang up . To make an outside call: Spkr • Press the line button, then press or lift the handset. - Page 6 Basic Phone Functions TRANSFER Using the dialpad: Transfr A CALL 1 Press ICOM TO AN The system selects an EXTENSION button, and puts the call on hold. 2 Dial the extension or outside number. 3 Announce the call. 4 Hang up. To cancel or return to the call on hold, press the button next to the flashing Green Light...
-
Page 7: Join A Call In Progress
Basic Phone Functions MAKE A While connected to the first party: Conf CONFERENCE 1 Press CALL 2 Connect with the next party. Conf 3 Press again. Calls are now conferenced. Repeat steps to add up to a total of 2 outside and 2 inside connections. To drop a participant: ETR Drop 1 Press the programmed... -
Page 8: Forward Your Calls
Adjust the speaker volume (while using speaker) or handset volume (while using handset) by pressing to increase or to decrease. ADJUST For ETR/MLS phones except MLS-12D and MLS-34D. DISPLAY • Adjust display contrast by pressing CONTRAST then to increase or... - Page 9 Using Features USE A To use a feature: FEATURE • Press the programmed button; Feature CODE or press and then the feature code (see the following pages) . Features that dial numbers automatically may need special characters to allow for correct dialing or system response.
-
Page 10: Call Waiting Camp-On Coverage
Feature & Programming Codes Display phones only. Use line button to program (turn on/off). Setting not programmed onto line button. Available only by using feature code. See your system manager for details. Must be programmed onto a line button. Press , then... -
Page 11: Forward And Follow Me
Feature & Programming Codes Press , then... or Program a Button: DIRECT VOICE MAIL DO NOT DISTURB FOLLOW ME + extension FORWARD Inside + extension + dial-out code Outside + number FORWARD cancel from all extensions: FOLLOW cancel from one extension: + extension cancel from your phone: + your extension... - Page 12 Feature & Programming Codes Press , then... or Program a Button: PAGING + group GROUP extension OR ALL PAGING + line number + line number LOUD- + zone SPEAKER PARK PICKUP General Group Inside + extension + extension Outside + line number + line number PRIVACY off :...
- Page 13 Feature & Programming Codes Press , then... or Program a Button: RINGING OPTIONS (cont.) No Ring All Lines No Ring One Line Personalized Ring + ring( – Shared SA Ring On Shared SA Ring Off SAVED NUMBER DIAL SIGNALING AND NOTIFY Signaling + extension Notify Receive...
Need help?
Do you have a question about the MLS and is the answer not in the manual?
Questions and answers