GMC 2015 Savana Owner's Manual page 170

Using the Dial or Call
Command
1. Press and hold /
two seconds.
2. Say Dial or Call.
3. Say the entire number without
pausing, or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
Calling 911 Emergency
1. Press and hold /
two seconds.
2. Say Dial or Call.
3. Say 911.
4. Say Dial or Call.
Once connected, the person called
will be heard through the audio
speakers.
Using the Digit Dial Command
The digit dial command allows a
phone number to be dialed by
for
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
Clear at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
for
Verify at any time.
1. Press and hold
two seconds.
2. Say Digit Dial.
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered,
say Dial.
Infotainment System
Once connected, the person called
will be heard through the audio
speakers.
Using the Re-dial Command
1. Press and hold
two seconds.
2. After the tone, say Re-dial.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
/ for
tone is heard in the vehicle.
Press
Press
7-25
/ for
/ to answer the call.
/ to ignore a call.