Do you have a question about the JM-STU01 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for AudioLink JM-STU01
Page 1
QUICK START USER GUIDE JM-STU01 w i d i g i t a l s y s t e m s . c o m...
Page 2
MAC OSX will recognize the Wi USB AudioLink and automatically install the universal driver. To select the Wi USB AudioLink as the computer’s audio output, open System Preferences from the dock or the main Apple Menu. Next, open the Sound preferences then choose the output tab and select Wi USB AudioLink.
Page 3
Connect the Wi USB transmitter to the USB Port on the optional Apple iPad Camera connection adapter Model MC531ZM/A Apple iPad iOS will recognize the Wi USB AudioLink and automatically install the universal driver. 3. Proceed to the Pairing section of this guide.
Page 4
“Your device is installed and ready to use.” To set the Wi USB AudioLink as your default device for sound playback and recording, or to change its settings, click the Start button, click Control Panel and then click Sound.
Page 5
“Your device is installed and ready to use.” To set the Wi USB AudioLink as your default device for sound playback and recording, or to change its settings, click the Start button, click Control Panel and then click Sounds and Audio Devices.
Page 6
The Power/Status green LED on the Wi USB AudioLink will start fl ashing fast. The Wi USB AudioLink is now in a Pairing mode and ready to search for receivers. Press and hold the LINK button on the receiver (Rx) for 3 seconds.
Page 7
Pairing Wi AudioLink/AudioStream Receiver (Rx) 1. Power ON/OFF 5. Volume Down 2. Link/VoIP 6. Mute/ Play/Pause 3. Power/Status LED 7. Next Track 4. Volume UP 8. Previous Track Wi USB AudioLink Transmitter ...
Page 8
Mixing Console & Home Stereo Setup Connect the Wi AudioLink or AudioStream receiver (Rx) to the mixing console audio input jacks using the 1/4” stereo Y-split to 1/8” stereo cable that comes with the Wi AudioLink and AudioStream digital wireless systems as shown below.
Page 9
Connect the 1/8” stereo connector end of your headphones or In-Ear personal monitor into the “Audio Output” jack on the Wi AudioLink or AudioStream receiver (Rx). To activate the VoIP Microphone on the Wi AudioStream receiver, press the LINK/ VoIP button once. The Blue LED will turn ON when the VoIP MIC is activated.
Page 10
Wi, Stylized Wi and Jangus Music Logos are registered trademarks of Jangus Music, Inc. in the United States. Wi USB AudioLink logo is a trademark of Jangus Music, Inc. All other trademarks included herein are the property of their respective owners. US and Foreign Patents Pending.
Need help?
Do you have a question about the JM-STU01 and is the answer not in the manual?
Questions and answers