SEON WIreless Microphone and Controller Quick Start Manual

WARNING
Do not use this product in or near water such as a
bathtub, sink, or swimming pool.
Do not use this product in the vicinity of a gas leak or to
report a gas leak.
CAUTION: EQUIPMENT DAMAGE
Do not attempt to disassemble the wireless microphone
and controller. There are no user serviceable parts
inside.
Important
Placement of items on the duty belt can restrict ready access to
important equipment. The location of the wireless transmitter or
any other device provided with this system that is carried on the
officer's person should be chosen with great care and
consideration. After a location is selected, the officer should test
access to and practice drawing primary items such as service
firearms and secondary defense devices such as aerosol subject
restraint, batons, electronic control devices, etc. Proper operation
of handheld radios and other signaling devices should also be
tested as should access to handcuffs and other restraining
devices.

Service and Warranty

If your Wireless Microphone is to be returned to Seon Design for
service, please call toll free 1-877-630-7366, or 604-941-0880,
provide the model and/or serial number of your unit, and ask for a
Return Authorization (RA) number. An RA number allows the
Service Technicians to better track your product when it comes in
for service. Please show the RA number on the outside of the
package.
ANY PRODUCT SENT TO SEON SESIGN WITHOUT AN RA
.
NUMBER MAY BE REFUSED
Please refer to the Warranty form provided with your product to
review the terms of warranty service, contact and shipping
information, as well as other important issues regarding the service
and operation of your product.
Information in this guide is subject to change without notice.
©September 2009 Seon Design Inc.
Printed in Canada Document Part Number: 700-0073 R001

Package Contents

Other package items (not shown) include:
www.seon.com
1
Wireless Microphone and
Controller
Quick Start Guide
Wireless bodypack
Wireless microphone base
(base)
Wireless lapel microphone
Wireless microphone
controller
•
Heavy duty double-sided VELCRO® tape, 2 in
(5 cm)
•
audio cable
RCA
•
Power harness with Mini-Fit connector
Before you begin the installation, make sure you have the
Rogue In-Car Video System Installation and Quick
Configuration Guide, 700-0072 handy for reference.

Location

CAUTION
Ensure the location is safe and the cables can run
properly.
Determine the location in the vehicle for mounting the
wireless microphone base and controller.
1