Step 4: Connect Power Source - Slingbox Solo Quick Start Manual

STEP 4: CONNECT POWER SOURCE

• Remove the power adapter from the accessories pack.
• Connect the power adapter into the Slingbox POWER connection.
• Plug the power adapter into an electrical outlet.
When plugged in, the lights blink a few times as the Slingbox starts up.
Once the lights stop blinking, your Slingbox is ready.
NETWORK POWER
TIP: If the network light
does not come on within
30 seconds, make
sure that the Slingbox is
correctly connected
to your network/router.
See Troubleshooting on
the reverse side for more
solutions, or go to:
support.slingmedia.com