Advertisement
Instruction Manual
The Xbox DVD Movie Playback Kit lets you
play DVDs on your Xbox console. The DVD
Movie Playback Kit consists of three items:
• Infrared receiver
• Remote control
• Instruction Manual
The DVD Movie Playback Kit is for use
exclusively with the Xbox™ video game
system from Microsoft.
Setting up the DVD Movie Playback Kit
To place batteries in the remote control
1. Remove the battery compartment
cover.
2. Place two AAA batteries (sold
separately) into the remote control.
3. Replace the batterycompartment
cover.
Notes about batteries:
Keep batteries out of reach of children.
Do not mix old and new batteries, or
batteries of different types. Follow
manufacturer's instructions on battery use.
Remove old, weak, or worn-out batteries
promptly
Always recycle or dispose of used batteries
in accordance with your local ordinances.
If a battery leaks, remove all batteries and
thoroughly clean the battery compartment
with a damp paper towel, or follow the
battery manufacturer's recommendations
for cleanup. If fluid from the battery comes
into contact with skin or clothes, flush skin
with water immediately.
IMPORTANT! Before using this product,
read the Xbox Video Game System
Instruction Manual for important safety
information and health warnings. Please
retain both the Xbox Video Game System
Instruction Manual and this manual for
future reference and warranty information.
The limited warranty covering this Xbox DVD
Movie Playback Kit is contained in the Xbox
Video Game System Instruction Manual.
To connect the infrared receiver
1. If the Xbox console is on, press the
power button on the Xbox console to
turn it off.
2. Connect the infrared receiver to any
controller port on the front of the
Xbox console.
3
Advertisement
