1. Manuals
  2. Brands
  3. Masterflex Manuals
  4. Printer
  5. HANDY-700
  6. User manual

Masterflex HANDY-700 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

1.OUT LINE
HANDY-700 ,a compact type printer with various functions which may be used
as a hand-held/belt-hung, Battery-operated unit, Infrared interface or as desk-
top/wall-hung unit to meet a today printing needs.
1-1.FEATURES
*. Ultra small-sized portable and desk-top configuration.
*. Quiet and fast printing(50mm/sec) using the direct line thermal printing
method.
* One(1) hour continuous printing with fully charged Lit-ion battery
*. Extremely easy to load a paper by CLAMSHELL unit.
*. Easy maintenance and head cleaning.
*. Setting the baud rate, handshaking, International Characters, density ETC.
by external button.
*. Support for many bar code types(JAN/EAN-8,JAN/EAN-13,
CODE39,CODE128,CODE93).
*. Command selection of font sizes(12x24,8x16).
*. Current printer status.
*. Auto online mode
*. Self-test facility
*. Dump mode function.

Advertisement

Table of Contents
loading

Summary of Contents for Masterflex HANDY-700

  • Page 1 1.OUT LINE HANDY-700 ,a compact type printer with various functions which may be used as a hand-held/belt-hung, Battery-operated unit, Infrared interface or as desk- top/wall-hung unit to meet a today printing needs. 1-1.FEATURES *. Ultra small-sized portable and desk-top configuration.

  • Page 2: Printer Parts & Accessories

    1-2. Printer Parts & Accessories. 1-2-1 Printer parts : 1) Printer cover 2) Operation panel 3) Power connector 4) Interface connector 5) Infrared window 6) Battery door 7) Power switch 8) Belt rack 1-2-2 Accessories. The set, besides the printer main unit, contains the following accessories : Roll paper (x 1) Interface cable...

  • Page 3: General Guide

    B(Battery with external charging) C(Battery with internal charging) 2.General Guide. 2-1.Description of printer parts The HANDY700 printer is based around a patented easy-loading printer mechanism designed. This mechanism consists of a main cavity into which a paper roll is dropped for loading. The thermal print head is at the front of this cavity and a rubber roller is attached to the lid of the mechanism.

  • Page 4: Paper Specification

    The Interface connector is fitted at right side of printer. This is 6pins RJ connector for RS-232C Communication. 2-1-4.Belt rack holes There are two holes in the base of the printer which allow the printer to be attached to vertical Surface Such as a wall or waistband.

  • Page 5: Charging Battery

    2-3-2 Battery 1) Kind of Specified Products Name : Camcorder battery pack Pack type : IN-5XL Cell type : LITHIUM-ION 2) Basic Characteristics Normal Voltage : 7.2V Minimum Capacity : 1650mAh Charge Conditions : Charge Voltage : 8.40±0.05V Maximum Charge Current : 1650mAh Charge Method : CCCV(Constant Current/Constant Voltage) Discharge Condition : Maximum Discharge Current : 2475mAh(1.5C) Discharge End Voltage : 5.5V/pack...

  • Page 6: Specifications

    2-4.Specifications Printing method Direct thermal No. of columns 32 columns : 384 dots/lines Character size 1.5mm x 3.0mm (12x 24) Line pitch 4.0mm Paper 57.5 x 60mm Interface Serial(RS-232C) and IrDA International character U.S.A., FRANCE, U.K., DENMARK I, SWEDEN,ITALY, SPAIN, JAPAN, NORWAY, DENMARK II, KOREA Buffer 7Kbyte(option:128KByte)

  • Page 7: Operation

    3.Operation 3-1.Precautions for installation HANDY-700 Printer may be installed in a variety of applications but, to Maintain your unit in optimum working conditions, the following recommendations should Be followed. Avoid dirty or dusty location or those with excessive heat or humidity.
  • Page 8 NOTE : If there are unprinted data in the memory after changing paper, The printer Go into online mode automatically and print the remaining data 5 seconds After closing paper cover. 3-4.Self-test. The purpose of the self test The self test checks whether the printer has any problems.

  • Page 9: Dump Mode

    Turn ON the power while pressing SEL and FEED button together ,Then printer Print [DUMP TEST] and wait data from host. 3-7.Maintenance. The HANDY-700 printer is requires very little maintenance but may benefit From cleaning as detailed below. Cleaning the printer The external surfaces may be kept clean by wiping a lightly damp cloth but this Only be done after unplugging all electronic connections.
  • Page 10 Cleaning the print-head Depending of the environment in which the printer is used, The print-head may The print-head may accumulate dust. Therefore it is necessary to clean it periodically. In order to maintain a good print quality. The cleaning period is dependent on the Environment and usage of the printer but the print-head should be cleaned at least Once a year or up to once a month in heavy duty applications.
  • Page 11 IrDA Protocol 1. Transmission control character SYMBOL VALUE SYMBOL VALUE PR_RES(WAIT) PR_START PR_END PR_RES(ACK) PR_DATA PR_RES(NAK) PR_STAT 2. FCS Calculation 2.1 Polynomial(CCITT X.25 ) 2.2 Examination( "C" Language) union u_crc{ unsigned char low; unsigned char buf[2]; unsigned int value; }crc; unsigned int crctable[260];...

  • Page 12: Data Format

    3.2 Data format <Start Response> <Start Command> <Data Response> <Data Command> <End Response> <End Command> (Note) Page : Page number( 1 to 7, 1 to 7, …) Length : data size(0 to 2Kbyte) 4. Example(Normal transmission) 4.1 Normal phase 1 Host Direction Printer...
  • Page 13 Data2 Command Data2 Response(Ack) End Command End Response(Ack) 4.3 Normal phase 3 Host Direction Printer Start Command Start Response(Ack) Data1 Command Data1 Response(Ack) Data2 Command Wait Response Wait 0.5sec(max) Data2 Response(Ack) End Command End Response(Ack) 5. Abnormal transmission 5.1 Phase with no receive command over 3 times Host Durection Printer...
  • Page 14 Data1 Command (No action due to receipt of no command) (Wait 0.5sec ) Data1 Command Data1 Response(Ack) Data2 Command Data2 Response(Nak) Data2 Command Data2 Response(Ack) Data3 Command (Due to no response,Waiting Data3 Response(Ack) for 0.5sec) Data3 Command Data3 Response(Ack) (The printer,that received data3 two times,Only send ACK response and do not print second data3) End Command End Response(Ack)

  • Page 15: Printing Data

    Data Response(Ack) End Command End Command (No action due to receipt of no Command) End Command (Because there was nornal printing action,This case does not involve in error) 6. Example 6.1 Status check Host Direction Printer 01h,02h,34h,DFh,87h,03h (stat:00h) 01h,02h,06h,00h,97h,5Bh,03h (Note : Refer ESC v command for status valus) 6.2 Printing data Host Direction...

  • Page 16: Command Summary

    Command Summary Command Name Page Horizontal tab Print and line feed (1)Print and return (2)Print and feed label to print starting position Cancel print data ESC FF Print data in label mode ESC ! n Select print modes ESC $ nL nH Set absolute print position ESC * m nL nH[d1…dk] Select bit-image mode...
  • Page 17 (Horizontal tab) [Format] ASCII : Decimal : [Description] Moves the print position to the horizontal tab position. This command is ignored If the next horizontal tab go over possible printing area. Horizontal tab position(units:dot) Font A( 8x16): 64,128,192,256,320 Font B(12x24): 96,192,288 [EX] Data : “1234567890123456789012”,0Ah,”123”,09h,”456”,09h, ”789”,09h,”012”,09h,”345”,0Ah...
  • Page 18 [EX] Data : “12345”,18h,”ABCDE”,0Ah Print : ESC FF (Print data in label mode) [Format] ASCII : ESC FF : 1B Decimal : 27 [Description] In the Label mode,Print the data in the print buffer and moves to starting position of next pages.
  • Page 19 ESC * m nL nH[d1…dk] (Select bit-image mode) [Format] ASCII : ESC * m nL nH [d1…dk] : 1B 2A m nL nH [d1…dk] Decimal : 27 42 m nL nH [d1…dk] [Description] Select bit-image mode using n for the number of dots specified by nL and nH,as follows; Print bit-image mode continouse : (1) Set the line specing to 24 (2) Select bit-image mode (3) LF(Line feed)
  • Page 20 ESC 2 (Set default line spacing) [Format] ASCII : ESC 2 : 1B 32 Decimal : 27 50 [Description] Set the line spacing to 32(default) for each lines. [Reference] ESC 3 n ESC 3 n (Set line spacing) [Format] ASCII : ESC 3 n : 1B 33 n Decimal : 27 51 n [Description] Set the line spacing.
  • Page 21 ESC R n (Select international character set) [Format] ASCII : ESC R n : 1B 52 n Decimal : 27 82 n [Description] n selects an international character set from the following table. [EX] Character Set Character Set U.S.A. Italy France Spain Germany...
  • Page 22 ESC { n (Set/cancel upside-down character printing) [Format] ASCII : ESC : 1B 7B n Decimal : 27 123 n [Description] Sets or cancel the Upside-down characters. (Valid only when input at the beginning of a line.) bit of n = 1(Sets), bit of n = 0(Cancel). Default = 0 [EX] Data :...
  • Page 23 GS H n (Select printing position of HRI characters) [Format] ASCII : GS H n : 1D 48 n Decimal : 29 72 n [Description] Selects printing position of HRI characters when printing a bar code. Printing position 0,48 No printed(default) 1,49 Above the bar code 2,50...
  • Page 24 32,36,37,43,45,46,47 1 ≤k 48 ≤d ≤57 CODABAR(NW-7) 1 ≤k 48 ≤d ≤57, 65 ≤d ≤68 36,43,45,46,47,58 CODE128A 2 ≤k 0 ≤d ≤127 CODE128B 2 ≤k 0 ≤d ≤127 CODE128C 2 ≤k 0 ≤d ≤127 [Reference] GS H n, GS w n, GS h n, GS k m n[d1…dn] GS k m n[d1…dn] (Print bar code) [Format]...
  • Page 25 GS x n (Set bar code print starting position) [Format] ASCII : GS x : 1D 78 Decimal : 29 120 n [Description] Sets the bar code print position of beginning(left). Sets the print position of beginning using the : n x 0.125 mm Range : n ≤255 Default : 0 [Reference] GS H n, GS w n, GS h n, GS k m[d1…dk] NUL, GS h n, GS k m[d1…dn]...
  • Page 26 6d s nL nH Decimal : 109 s nL nH [Description] Sets the length of mark potion in label mode. s=0 : mark type label paper s=1 : no merk type label paper Label length : (nL + nH x 256) x 0.125mm Label range : 320 <...
  • Page 27 DC2 v nL nH (Set LSB bit image) [Format] ASCII : v nL 76 nL Decimal : 18 118 nL [Description] FS C n (Select code system) [Format] ASCII : FS : 1C 43 n Decimal : 28 67 n [Description] : This command is valid in external ROM only(option).
  • Page 28 Cuntry Cuntry Korea Japan U.S.A Euro England...

Table of Contents