4: Caring For Mobi View; Mobi View - eInstruction Mobi View Quick Start Manual

4: Caring for Mobi View

Mobi View

Charge Mobi View
The Mobi View should arrive partially charged, and ready for installation.
eInstruction recommends that before you begin using your Mobi View in your
classroom, you fully charge the tablet and pen for optimal battery life.
a. Carefully pull out the plastic tab from the pen (if you
have not already done so) and place the pen in the
recharging pen holder.
b. Remove the RF hub from the back of Mobi View.
For convenience, store the RF hub in the RF hub
holder on the charging stand.
c. Place Mobi View on the charging stand.
d. Plug the USB cable into the power adapter and
plug into the wall outlet. Allow approximately 8
hours to fully charge the battery.
Tip! You may use Mobi View while it is charging. You will notice the pen and
battery charging indicators on the touchscreen when powered on.
Tip! Alternately, charge Mobi View by connecting it to a computer using the
provided USB cable. Allow 12 hours if using this method.
Mobi View charging indicators
(power on only)
Pen charging
Home
16
RF hub holder
Battery charging